Advertisement
9
Secure the Touch Screen at these points with the SEMs screws:
Figure 7:
Secure the Touch Screen
10
Snap the bezel onto the Touch Screen.
Figure 8:
Snap on the Bezel
You have now finished installing the Control4 Wall-Mount Touch Screen.
Troubleshooting
Question: What if the Touch Screen is damaged?
Answer: Contact your Touch4-authorized reseller.
Question: What if I have network connection problems?
Answer: Make sure the network cable connectors are firmly locked into the net-
work jack. See Composer online topic: "Guidelines for Setting up a Wired or
Wireless Network."
Regulatory Compliance
This product complies with standards established by the following regulatory
bodies:
•
Federal Communications Commission (FCC)
•
Industry Canada
•
Underwriters Laboratories Inc. (UL)
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the receiver into an outlet on a circuit different from that to which the
equipment is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
IMPORTANT! Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Industry Canada Statement
This Class B digital apparatus complies with Canada ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Underwriters Laboratories Inc. (UL)
This product has been tested by UL as part of a system and has been found to
be in compliance with:
UL 916:1998: Standard for Energy Management Equipment when used with
the C4-WBN10 Wall Box
Admonitions in this Document
The following admonitions found in this document draw your attention to
important safe practices and additional information that can help you avoid
injury, death, or loss of material or time.
WARNING! potentially hazardous situation that, if not avoided, may
result in death or injury. DO NOT IGNORE A WARNING!
This indicates information that will help you
IMPORTANT!
avoid damage to your equipment, loss of materials, or
loss of time. PAY ATTENTION TO THESE IMPORTANT
STATEMENTS!
This indicates a note on related information about the current topic.
About this Document
United States Patents Pending. Copyright (c) 2006-2007 Control4 Corporation.
Control4 and the Control4 logo are registered trademarks of Control4
Corporation. All trademarks are properties of their respective owners.
Part Number 200-00002 Rev A
Advertisement
