Adjusting The Surround Sound; To Simulate The Surround Sound [3D Phonic] - JVC XV-501BK Instructions Manual

Adjusting the surround sound

To erase the 3D PHONIC
screen, press
ENTER
PHONIC screen disappears if
there are no operations for
m ore than 10 seconds.
Downloaded from: https://www.usersmanualguide.com/
You can select the sim ulated surround effect depending on the disc contents. If
you connect the unit to your stereo system , you can enhance sound quality and
produce a greater surround effect.

To simulate the surround sound [3D PHONIC]

During playback
Press
1
Within 10 seconds, select
2
the desired effect mode by
pressing
Each tim e you press
effect m ode changes as follow s:
ACTION*
DRAMA
THEATER
* When you play the DVD disc recorded in Dolby Digital and contains m ore
than 3 channel sound, ACTION does not appears.
Press
3
effect level.
. The 3D
NOTES
The sound effect (3D PHONIC) is possible only on discs w hich are recorded
in DOLBY SU RROU N D or DOLBY DIGITAL. How ever, som e DOLBY
SURROUND or DOLBY DIGITAL discs do not contain the rear sound signal,
in this case, the setting can be changed but the sound effect cannot be
obtained.
You can change the setting of the discs w hich do not contain the rear sound
signal, but the sound effect cannot be obtained.
The sound effect is not possible, and w ill not w ork even if set w hen the unit
outputs the DTS or Dolby Digital bitstream signal from the DIGITAL OUT
jack.
The sound effect w ill not be set or operate, even if
sound of DVD discs recorded in Linear PCM .
W hen you set t he 3D PHON IC funct ion t o on, t he DOW N M IX and
COM PRESSION setting in the PREFERENCE display are disabled.
.
3D PHONIC
.
3D PHONIC
, the
3D PHONIC
OFF
to adjust the
Basic Operations
3D PHONIC
THEATER
Selected effect m ode
3D PHONIC
THEATER
Effect level
is pressed, on the
3D PHONIC
L H
L H
31