Page 2
Handling and Safety Precautions These precautions should be strictly observed in order to ensure safe, long-term use of the product. The following precautions should be observed particularly strictly: 1. Since this model is made to give the same sensation to a living body, unreasonable handling may lead to breakage of the model.
1. Name of each part ① ② ④ ⑤ ③ ⑦ ⑥ ⑧ ① Main body ② Uterine Involution (Normal Day 1) ③ Uterine Involution (Subinvolution) ④ Uterine Involution (Normal, Day 3) ⑤ Uterine Involution (Normal, Day 5) ⑥ Pubis ⑦...
2. Instructions for handling Method for setting a uterus recession model 1. Apply enough powder to the abdominal cavity of the uterus recession model. 2. Set the model in the position shown in the figure. ※ Make sure that the model is not dislocated as the direction is fixed.
3. Storage method 1. Store the main body with the attached cover in a place avoiding direct rays of the sun or ultraviolet rays. 2. Place the attached sponge for prevention of deformation in the abdominal cavity of the main body.
Need help?
Do you have a question about the LM-055 and is the answer not in the manual?
Questions and answers