Installing Software Drivers (Windows-Based Pc); Transferring Files From Camera To Pc Or Macintosh - Oregon Scientific PV100B User Manual

NOTE: All image / movies can be viewed in Playback Mode or the
camera can be used as a TV Cam in Record Mode.
INSTALLING SOFTWARE DRIVERS
(WINDOWS-BASED PC)
Use the USB cable included to connect the camera to your Windows-
based PC. This enables you to transfer, edit, and playback pictures
and movies onto your PC.
Users of Windows 98SE-based PCs must install the software first
before connecting the camera to the computer.
1. Insert the CD labelled "PV100" into your CD-ROM drive. The
2. If the "autorun" feature is disabled on your PC, start the
3. Follow the on-screen instruction to complete the installation of
NOTE: The Macintosh does not require software driver installation.
TRANSFERRING FILES FROM CAMERA TO PC OR
MACINTOSH
NOTE: Only the images and movies stored in the camera's current
memory device (SD card or internal memory) will be visible on the PC
or Macintosh.
NOTE: The LCD is automatically off when the camera is connected to
the PC or Macintosh.
1. Turn on your PC or Macintosh and allow your system's operating
2. Turn off your digital camera. Connect the camera and your PC
3. Turn on your digital camera to any mode. The device's status
PV100 Eng R7 a OP
installation will start automatically.
installation by running [x:\setup.exe] where "x:" is the drive letter
of the CD-ROM drive.
the camera drivers and software. When done, click on the [Finish]
button on-screen to restart the PC.
system to boot up.
or Macintosh via the USB cable.
lamp will blink.
28
27
9/9/04, 2:45 PM