Table of Contents
Advertisement
REMOVING THE SD CARD
BASIC PHOTOGRAPHY
PREPARING THE CAMERA
1. At the camera's handgrip position, slide the ON / OFF switch to
2. Check the battery indicator to make sure there is enough power.
3. Slide the Mode Switch to the desired setting (Record Mode or
4. In Record Mode, press the DISP / OK button to toggle between
PV100 Eng R7 a OP
ON to turn on the camera.
ICON
DESCRIPTION
Adequate power remains
Battery is running low
Battery is running very low
Battery is exhausted
Playback Mode). The Mode Switch is used to either record or
playback images or movies taken.
3 levels of display information settings:
A.
LCD with photo information displayed.
B.
LCD without photo information displayed but Date / Time
and battery icon is displayed.
C.
Turn off LCD.
7
1. Turn off the camera.
2. Push against the card lodged inside
t h e m e m o r y s l o t . T h e c a r d
automatically ejects itself out of the
slot.
6
9/9/04, 2:45 PM
Advertisement
Table of Contents
