Connecting To External Devices; Connecting To A Tv; Installing Software Drivers (Windows-Based Pc) - Oregon Scientific DS9810 User Manual

5.0 mega-pixel digital camera with color display

Hide thumbs Also See for DS9810:

Table of Contents

CONNECTING TO EXTERNAL DEVICES

You can playback the photos and videos you have recorded in the

camera on your TV. Connect your camera to the TV with the video

cable (included).

NOTE: Be sure to adjust the TV Out setting to correspond with your

country's system (PAL / NTSC) before connecting the camera to the TV.

To connect your digital camera to the TV:

1. Turn off the TV and camera before connecting the video cable.

2. Plug the video cable into the camera's video socket.

3. Connect the video cable's yellow connector to the yellow AV

4. Turn the TV and camera on. Make sure to switch the TV to the

NOTE: The LCD is automatically turned off when the camera is

connected to a TV.

NOTE: All photos / videos can be viewed in Playback Mode or the

camera can be used as a TV Cam in Capture Mode.

INSTALLING SOFTWARE DRIVERS

(WINDOWS-BASED PC)

Use the USB cable included to connect the camera to your Windows-

based PC. This enables you to transfer, edit, and playback photos

and videos onto your PC.

Users of Windows 98SE-based PCs must install the software first

before connecting the camera to the computer.

To install the software driver:

1. Insert the CD labeled "DS9810" into your CD-ROM drive. The

DS9810 EngManl R3 (V2.0) OP

All manuals and user guides at all-guides.com

input terminal of your TV.

appropriate AV channel display.

installation will start automatically.

¶´ƒ

1/7/05, 4:00 PM

Table of Contents