Using The Camera; Installing The Batteries; Inserting A Memory Card; Formatting The Memory Or Sd Card - Oregon Scientific DS 9541 Quick Start Manual

10- Normal / Macro
mode indicator
11- View center

Using the camera

Installing the batteries

1. Open the battery door.
2. Insert 2 AAA alkaline batteries into the camera.
3. Turn on the camera.
Press the POWER button to turn it on (press it again to turn off).

Inserting a memory card

This camera has built-in internal memory. This memory can be extended with a
SD memory card.
Follow the instructions given below to insert the optional SD memory card into the
camera.
1. Turn off the camera first.
2. Insert the SD card into the camera.
Note: There is only one right direction to insert the SD memory card into the slot.
Do not force the card into the slot, or else it may damage both the camera
and the SD memory card.
Note: The SD memory card must be formatted before taking photographs. See
the following sections for more information.

Formatting the memory or SD card

1. Press Menu button
2. Select Setup setting by right key.
3. Press OK to confirm and select by up or down key.
4. Press OK to format the card or memory.

Setting the resolution

The camera can be set to different resolutions.
1. Press MENU to set proper resolution.
Resolution: VGA（640 x 480）1.3M（1280 x 960）3.1M (2048 x 1536),
5M (2560 x 1920), 8M (3264 x 2448), 12M (4032 x 3024)
Normal mode (0.5m – infinity)
Macro mode (11cm –18cm)
7