Installing Your New Appliance - Electrolux EQE5657 User Manual

3. INSTALLING YOUR NEW APPLIANCE

Unpacking
ENVIRONMENT
Most of the packing materials are
recyclable. Please dispose of those
materials through your local recycling
depot or by placing them in appropriate
collection containers.
Important – check for any damages or marks.
If you find the refrigerator is damaged or
marked, you must report it within 7 days should
you wish to claim for damage/ marks under the
manufacturers warranty. This does not affect
your statutory rights.
Clean your refrigerator thoroughly following
the instructions in the "Cleaning" section and
wipe off any dust that has accumulated during
shipping.
Locating the refrigerator
CAUTION
Automatic aerosol systems (such as
insect control) should not be located
adjacent to the product as the spray
may cause long term damage to the
external plastics of he appliance.
Do not put the refrigerator in a location that
is too cold or is unprotected, for example
in a garage or on a veranda. The ambient
temperature should be above 10°C.
Put the refrigerator in a dry place avoiding
areas of high moisture or humidity.
Ensure the refrigerator is located on an even
surface.
Installing your refrigerator
H
W
D D1
285
mm
122°
Product Dimensions
Total width (W)
Total depth (D)
Maximum height (H)
Cabinet width (W1)
Cabinet depth (D1)
Depth door open 90° (D2)
When positioned in a corner area, spacing of
at least 285mm on the hinge side will allow the
doors to open enough to enable the removal of
bins and shelves.
NOTE: Doors are designed to sit proud of
cabinetry (not flush).
Installation options for optimal aesthetics :
Minimum side clearance kitchen cabinet
fridge body must sit 10mm proud of kitchen
cabinetry.
Minimum cabinetry opening (WxDxH) :
900mm x 649mm x 1800mm
Front of fridge body in line with kitchen
cabinet
Side clearance must be 25mm either side of
W1
the fridge body, to have the fridge doors siting
proud of the kitchen cabinetry.
Minimum cabinetry opening (WxDxH) :
D2
940mm x 660mm x 1800mm
90 °
285
mm
122°
30 mm
5 mm
10mm
Note : Spacers supplied to assist
30 mm
25 mm
EN 7
mm 896
mm 755
mm 1795
mm 890
mm 640
mm 1112
5 mm
25 mm