1. Manuals
  2. Brands
  3. Baldan Manuals
  4. Farm Equipment
  5. CRI-E
  6. Instruction manual

Baldan CRI-E Instruction Manual

Drag type offset disc harrow remote control - special
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CRI-E
Drag Type Offset Disc Harrow Remote Control - Special

Advertisement

Table of Contents
loading

Related Manuals for Baldan CRI-E

Summary of Contents for Baldan CRI-E

  • Page 1 CRI-E Drag Type Offset Disc Harrow Remote Control - Special...
  • Page 3 Any solicitation of warranty, please contact our Baldan technical service, by your Baldan dealer that you bought our implement. Reaffirm the necessity to read carefully of warranty certificate and note all of items from this manual, therefore you will increase...
  • Page 4 CRI-E Drag Type Offset Disc Harrow Remote Control - Special...

  • Page 5: Table Of Contents

    Mounting of Disc Sections - CRI-E 36 / 40 Discs (Figures 04) ..........................................Mounting of Disc Sections - CRI-E 44 / 48 Discs (Figures 05) ..........................................Mounting of Frames (Figure 06) - Cri-E 36 / 40 / 44 Discs ..........................................Mounting of Frames (Figures 07) - Cri-E 48 Discs .............................................
  • Page 6 Work (Figures 18) ......................................................Harrow Displacement (Figure 19) ..................................................Crossbar Adjustment (Figure 20) ..................................................Adjustment of Stabilizer Bar and Complete Adjuster ............................................How to Start Harrowing ....................................................Harrowing from Outside to Inside (Figure 22) ..............................................Harrowing from Inside to Outside (Figure 23) ..............................................Plots With Level Curves (Figure 24) ..................................................

  • Page 7: Warranty

    WARRANTY PRODUCT WARRANTY A BALDAN IMPLEMENTOS AGRÍCOLAS S/A, ensures the dealer normal performance of the implement for a period of six (6) months as of the delivery date on the retail invoice to the first final consumer. During this period, BALDAN undertakes to repair defects in material and/or of manufacture of its liability, including labor, freight and other expenses of the dealer’s liability.
  • Page 8 The product is excluded from this term if it is repaired or modified by representatives not belonging to the BALDAN dealer network, as well as the application of non-genuine parts or components to the user’s product.

  • Page 9: General Information

    GENERAL INFORMATION TO THE OWNER BALDAN IMPLEMENTOS AGRÍCOLAS S/A, is not responsible for any damaged caused by accident due to usage, transportation, or in the improper or incorrect transportation of its implement, whether by negligence and/or inexperience of any person.

  • Page 10: Safety Rules

    • There are risks of serious injury by refully to know the recommen- tions, when are you properly ac- or equipment. tipping when working on slopes. ded safety rules. commodated and with the seat • Never use excessive speed. belt fasted. Instruction Manual CRI-E - 8...
  • Page 11 • When carrying out any service on the • Inform yourself about the proper way discs, use safety gloves on his hands. or recycling or disposing residues. PROTECT THE ENVIROMMENT! Instruction Manual 9 - CRI-E...
  • Page 12 • Before coupling or uncouple the hoses relief • When filling the tire, always use a • If the CRI-E is not properly enga- the pressure, using the tractor’s control when it containment device (filling cage). ged, do not start the tractor.

  • Page 13: Warnings

    While maneuver the tractor to clamp the implement be sure if there is space enough and nobody is too much close, maneuver always in slow gear and be ready to brake in case of emergency. 09 - Do not adjust the implement working. Instruction Manual 11 - CRI-E...
  • Page 14 Drugs and alcohol will affect an operator’s alertness and coordination. Do not operate any engine under these conditions. 16 - Explain the operation, inspect and maintenance instructions to those users or operators who can not read. Instruction Manual CRI-E - 12...

  • Page 15: Components

    COMPONENTS igure CRI-E - DRAG TYPE OFFSET DISC HARROW REMOTE CONTROL - SPECIAL 01 - Front Frame 18 - Wheel Articulation Shaft 02 - Back Frame 19 - Tire 03 - Stiffener 20 - Finish Disc 04 - Stabilizer Rod...

  • Page 16: Technical Specifications

    MOUNTING OF DISC SECTION (FIGURE 02) - When mounting the CRI-E, always start with the set of discs and proceed as follows: 1 - Place the concave thrust washer (2) on the shaft (1), followed by the nut (3), latch (4), securing it with the pressure washer (5) and screw (6).

  • Page 17: Mounting Of Finish Disc (Figure 03)

    (5) and screw (6). 2 – Then put the finish disc (7), reel (8), disc (9) and bearing (10) on the shaft (1) and so on successively, as shown in figure 3. igure Instruction Manual 15 - CRI-E...

  • Page 18: Mounting Of Disc Sections - Cri-E 36 / 40 Discs (Figures 04)

    MOUNTING OF DISC SECTIONS (FIGURES 04) - CRI-E 36 / 40 DISCS CRI-E 36 DISCS CRI-E 40 DISCS igures Instruction Manual CRI-E - 16...

  • Page 19: Mounting Of Disc Sections - Cri-E 44 / 48 Discs (Figures 05)

    MOUNTING OF DISC SECTIONS (FIGURES 05) - CRI-E 44 / 48 DISCS CRI-E 44 DISCS CRI-E 48 DISCS igures Instruction Manual 17 - CRI-E...

  • Page 20: Mounting Of Frames (Figure 06) - Cri-E 36 / 40 / 44 Discs

    MOUNTING OF FRAMES (FIGURE 06) - CRI-E 36 / 40 / 44 DISCS - To mount the front and back frames of the CRI-E, proceed as follows: 1 - Put the front frames (1) and back frames (2) on a flat and clean place.

  • Page 21: Mounting Of Disc Section On The Frame (Figures 08)

    3 – After mounting, check to see if the wedges (1) are fa- cing the concavity of the discs. igures Instruction Manual 19 - CRI-E...

  • Page 22: Mounting Of Bars And Cleaners (Figures 09)

    - To mount the wheel shaft, proceed as follows: 1 – Couple the shaft hub (1) to the wheel shaft (2) and secure the shaft hub (1) to the stiffener (3) through screws (4), flat washers (5), pressure washers (6) and nuts (7). Instruction Manual CRI-E - 20...
  • Page 23 5 – Couple the stabilizer rod (23) to the wheel shaft (2), securing it using the screw (24) and pressure wa- sher (25). 6 – Finish mounting by coupling the tire (27) to the wheel support (8) using the screw (28) and nut (29). igure Instruction Manual 21 - CRI-E...

  • Page 24: Mounting Of Coupling Header (Figure 11)

    (12) using the latch and pin (13), pressure wa- sher (14) and screw (15). 4 – Finish mounting the coupling header (1), securing the support (16) using the pin (17) and latch (18) and secure the support of the hoses (19). Instruction Manual CRI-E - 22...

  • Page 25: Mounting The Hydraulic System (Figure 12)

    (8) and then couple the hydraulic ho- ses (1) to it. 3 – Finish mounting, coupling the hydraulic hoses (9) to the oil divider (6), passing them through the hole of the hose support (10). igure Instruction Manual 23 - CRI-E...

  • Page 26: Mounting Of The Back Coupler (Figure 13)

    (3), pressure washers (4) and nut (5). pressure washers (4) and flat washers (5). 2 – Then put the war- ning sign (6) and se- igure cure with the screws (7), pressure washers (8) and nuts (9). igure Instruction Manual CRI-E - 24...

  • Page 27: Operations

    3 – Finish coupling the hydraulic hoses (6) to the quick coupling system of the tractor. TRACTOR (FIGURE 15) - To couple the CRI-E to the traction bar of the tractor, follow the instructions below: ADJUSTMENT OF HARROW SPACING (FIGURES 16) 1 - Before coupling the harrow, look for a safe place of easy access.

  • Page 28: Transportation / Work

    TRANSPORTATION (FIGURES 17) and attach it to the sti- ffener (5) using the pin (3) - Before transporting the CRI-E, proceed as follows: and latch (4). Operate the full stroke of the hydraulic cylinder (1), put the latch (2) Instruction Manual...

  • Page 29: Work (Figures 18)

    WORK (FIGURES 18) HARROW DISPLACEMENT (FIGURE 19) - Before operating the CRI-E, proceed as follows: - Displacement of the harrow must be performed when the harrow is not 1) To limit the giving a perfect finish, meaning that it is leaving a trail of the tractor.

  • Page 30: Crossbar Adjustment (Figure 20)

    1 - INCREASE PENETRATION. observe their leveling. If ne- 2 - REDUCE PENETRATION. cessary, level using the adjus- ter (letter “A”). Note: If necessary, the springs (B) can also be adjusted using the nuts (C). igure igure Instruction Manual CRI-E - 28...

  • Page 31: How To Start Harrowing

    - Do not turn to the right, the harrowed land must always be to the left of the tractor operator. HARROWING FROM OUTSIDE TO INSIDE (FIGURE 22) working direction Furrow igure furrow igure Instruction Manual 29 - CRI-E...

  • Page 32: Plots With Level Curves (Figure 24)

    1- After the first day of work with the CRI-E, retighten all screws and nuts. Check the conditions of the pins and latches. 2- Adjust the tractor according to the content of the instruction manual, always using the front and back weights to stabilize the equipment.

  • Page 33: Maintenance

    MAINTENANCE TIRE PRESSURE (FIGURE 25) - CRI-E was developed to provide the maximum yield on the land The tires must always be correctly calibrated to avoid premature wears conditions. Experience has shown that periodic maintenance of by excess or lack of pressure and ensuring precision in the distribution.

  • Page 34: Lubrication

    Tutela Jota MP 2 EP Petronas Tutela Alfa 2K In the case of other lubricants and/or brands of Tutela KP 2K IMPORTANT equivalent greases that are not on this table, consult the technical manual of the lubricant manufacturer. able Instruction Manual CRI-E - 32...

  • Page 35: Lubricate Every 60 Working Hours (Figures 26)

    LUBRICATE EVERY 60 WORKING HOURS (FIGURES 26) SELF-LUBRICATING BUSHINGS (FIGURE 27) CRI-E has self-lubricating bushings in the “A” clamping hub. These • bushings do not require any type of grease or lubricant. igures igure IMPORTANT ATTENTION Only in the initial assembly of the When replacing the self-lubricating clamping hub “A”, should grease be...

  • Page 36: Discs

    BEARINGS this requires mounting the cover (3) with as - CRI-E is equipped with AXI FORTI bearings that have greater many joints (4) conside- resistance and superiority. red necessary. - The oil level of the bearings should be checked every 8 hours of 4) The bearing should work, removing it from the drum.

  • Page 37: Calculations

    - E.g.: For a CRI-E harrow of 36 discs, how many HA does it produce in - To know the time spent working an area of known value, divide the va- one working hour with an average velocity of 7 km per hour.

  • Page 38: Cleaning

    - Check the frame, cleaners and coupling bar and paint them when necessary. - Keep the equipment on a plane surface in a protected place away from animals and children. igure Instruction Manual CRI-E - 36...

  • Page 39: Identification

    IDENTIFICATION PRODUCT IDENTIFICATION To consult the parts catalog or request technical service from Baldan, always indicate the model (1), serial number (2), date of manufacture (3) informed on the identification. ALWAYS REQUIRE BALDAN ORIGINAL PARTS ATTENTION The drawings in this instructions manual are for illustrative purposes only. To enable a better overview and detailed instructions, on some drawings in this manual, safety devices (covers, shields, etc..) were removed.

  • Page 40: Product Identification (Figure 30)

    Do the identification below to always have the properly informations about your equipment life time. Owner: _______________________________________________________________________________________________________________ Dealer: _______________________________________________________________________________________________________________ Farm: _____________________________________________________City: ____________________________ Country: __________________ Model: _______________________________________________________________________________________________________________ Warranty: __________________________________________________ Serial Number: _____________________________________________ Purchase Date: _________ / ____________ / ____________ Invoine Number: ____________________________________________ Instruction Manual CRI-E - 38...

  • Page 41: Notes

    NOTES Instruction Manual 39 - CRI-E...

  • Page 42: Certificate Of Warranty

    Any repair made to the product wich is in warranty period by the dealer, will only be authorized by Baldan after budget previous presentation describing pieces and labour to be accomplished. It is out of this term the product wich has repairs or modifications not made by dealers from BALDAN’S network, as well as pieces applications or not 07 - authentic components to the product by the user.
  • Page 43 (in case of requested). BALDAN keeps the right of changing and or improve the technical characteristics of its products, without notice and without the obligation of act like this 15 - way with its previously manufactured products.
  • Page 45 INSPECTION AND DELIVERY CERTIFICATE SERVICE BEFORE THE DELIVERY: This equipment was very carefully prepared by the dealer’s organization, inspected in all its parts in agreement with the • manufacture’s prescription. • DELIVERY SERVICE: The user was informed about the current guarantee terms and instructed about maintenance care and utilization. •...
  • Page 47 INSPECTION AND DELIVERY CERTIFICATE SERVICE BEFORE THE DELIVERY: This equipment was very carefully prepared by the dealer’s organization, inspected in all its parts in agreement with the • manufacture’s prescription. • DELIVERY SERVICE: The user was informed about the current guarantee terms and instructed about maintenance care and utilization. •...
  • Page 49 Owner: ____________________________________________________________________ Phone: ____________________________________________________________________ Adress: _______________________________________________________________________________________________________________ Number: ________________________ City: ______________________________________________________________________ State: _____________________________________________________________________ E-mail: _____________________________________________________________________________________ Date of sale: _______________________________________________ 3ª Page - Manufacturer _________________ Signature / Store’s stamp _______________________________________________________________________ Please send this filled copy to Baldan, until 15 days after the purchase.

Table of Contents