Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Baldan Manuals
  4. Farm Equipment
  5. CRSG 32
  6. Instruction manual

Baldan CRSG 32 Instruction Manual

Hide thumbs Also See for CRSG 32:

Advertisement

Quick Links

Download this manual
CRSG
32-48
Trailled Offset Disc Harrow
CRSG-L
18-32
Trailled Offset Disc Harrow Light
CRI
32-44
Drag Type Offset Disc Harrow Remote Control
CRI-R
12-26
Drag Type Offset Disc Harrow Remote Control
Instruction Manual
Strong

Advertisement

loading

Related Manuals for Baldan CRSG 32

Summary of Contents for Baldan CRSG 32

  • Page 1 CRSG 32-48 32-44 Trailled Offset Disc Harrow Drag Type Offset Disc Harrow Remote Control CRSG-L CRI-R 18-32 12-26 Trailled Offset Disc Harrow Light Drag Type Offset Disc Harrow Remote Control Instruction Manual Strong...
  • Page 3 Any solicitation of warranty, please contact our Baldan technical service, by your Baldan dealer that you bought our implement. Reaffirm the necessity to read carefully of warranty certificate and note all of items from this manual, therefore you will increa-...
  • Page 4 18-32 12-26 Trailled Offset Disc Harrow Light Drag Type Offset Disc Harrow Remote Control Strong Scan the QR Code on the BALDAN IMPLEMENTOS AGRÍCOLAS S/A. identification plate of your CNPJ: 52.311.347/0009-06 device and access this Insc. Est.: 441.016.953.110 Instruction Manual online.
  • Page 5 Mounting of the hydraulic system and articulating wheel assembly CRI/CRSG 12 - 28 models with single wheels ............................Mounting of the hydraulic system and the articulating wheel assembly CRI/CRSG 32 - 48 models with dual wheels ........................... CRI/CRSG 32 - 48 models with large single wheel version ..............................................

  • Page 6: Safety Rules

    01. SAFETY RULES THIS ALERT SYMBOL INDICATES IMPORTANT SAFETY NOTES. WHENEVER YOU FIND IT IN THIS MANUAL, READ THE MESSAGE WITH ATTENTION TO AVOID ANY ACCIDENT. WARNING WARNING WARNING WARNING • Read this instruction ma- • Only start the tractor opera- •...
  • Page 7 01. SAFETY RULES WARNING WARNING WARNING WARNING • Before any equipment •Do not work with the tractor if • Never weld the wheel mounted with • Before beginning the work or maintenance, make sure that the front bee without enough tire, the heat may cause air pressure transportation of CRSG/CRI/CRI-R, is properly stopped.
  • Page 8 01. SAFETY RULES WARNING WARNING WARNING • Hydraulic oil works under pressure and may cause serious injuries if • Always keep yourself distant from the • Remove the ignition key before per- there are any leakages. Periodically check the conservation status of active elements of the CRSG/CRI/CRi-R formin any type of maintenance the hoses.
  • Page 9 The incorrect handling of the tractor engine can result in serious or fatal accidents. Before using the read carefully the instructions in this ma- nual. Be sure that the person responsible for the operation is instructed about the correct handling and safety and has read and understood the instruction manual concerning this machine.
  • Page 10 Do not carry out adjustments with the implement working. When working over hilly areas try to keep the necessary stability. In case of instability reduce the acceleration, turn the wheels to the inclined side of the land and never lift the implement. Always use the tractor at safe speeds, especially when working in irregular or inclined areas, make sure the tractor is always in gear.
  • Page 11 TRAILLED OFFSET DISC HARROW - CRSG DRAG TYPE OFFSET HARROW REMOTE CONTROL - CRI DRAG TYPE OFFSET HARROW REMOTE CONTROL - STRONG - CRI-R 02. COMPONENTS 01 - Front disc gang 02 - Rear disc gang 03 - Central main frame 04 - Stabilizer bar 05 - Hydraulic cylinder 06 - Hydraulic hoses...
  • Page 12 150 - 250 2100 2260 140 - 150 Single Baldan reserves the right to modify any technical specifications without prior notice. The technical specifications it´s approximate and informed by regular conditions of work. Instruction Manual CRSG / CRI / CRI-R - 10...
  • Page 13 4995 260 - 278 Dual Table 2 Baldan reserves the right to modify any technical specifications without prior notice. The technical specifications it´s approximate and informed by regular conditions of work. Instruction Manual 11 - CRSG / CRI / CRI-R...
  • Page 14 3040 180 - 208 Single Table 3 Baldan reserves the right to modify any technical specifications without prior notice. The technical specifications it´s approximate and informed by regular conditions of work. Instruction Manual CRSG / CRI / CRI-R - 12...
  • Page 15 Figure 2 06. ASSEMBLY 01 - Check the amount of parts in the box using the parts list. 02 - Before starting the assembly wear gloves. 03 - Install on the shaft (#1) the washer from the disc (#2), the nut (#3) locking washer (#4), using the bolt (#5), keep the nut in the same position of the shaft edge.
  • Page 16 08 - The drawing 4 shows the assembley for each model of harrow. CRI-R 12 Blades CRI-R14 Blades CRI-R16 Blades CRSL-L/CRI-R 18 Blades CRSG-L 20 Blades CRSG-L/CRI-R 20 Blades CRSG-L/CRI-R 22 Blades CRSG-L/CRI-R 24 Blades CRI-R 26 Blades SYMBOL = BEARING = SPOOL = BLADES Figures 3...
  • Page 17 CRSG-L 28 Blades CRSG-L 32 Blades CRSG/CRI 32 Blades CRSG/CRI 36 Blades Figures 3 CRSG/CRI 40 Blades CRSG/CRI 44 Blades CRSG/CRI 48 Blades Instruction Manual 15 - CRSG / CRI / CRI-R...
  • Page 18 Figure 4 ASSEMBLE OF FRONT AND REAR GANG 09 - Insert the front gang (#1 figure 05) and rear (#2), in safety terrain. 10 - Install the frame (#3) over the gangs and atta- ch using the bolts (#4), lock (#5), washer (#6) and nut (#7).
  • Page 19 11 - Figure 5 Raise the gang front or rear install the blades as il- lustrated on the drawing 04, checking the bearing and gang holes are aligned, then mount using the bolt (#1 - Drawing 05), be sure the that the support is turned in a concave direction as illustrated on the drawing 06.
  • Page 20 Figure 7 MOUNTING OF THE HYDRAULIC SYSTEM AND ARTICULATING WHEEL ASSEMBLY CRI/CRSG 12 - 28 MODELS WITH SINGLE WHEELS 13 - Slide the pillow block hubs, item (2) in the illustration, onto the axles of the wheel articulating system (3) lift the assem- bly to allow fixation of the hubs to the frame and tighten the bolts.
  • Page 21 MOUNTING OF THE HYDRAULIC SYSTEM AND THE ARTICULATING WHEEL ASSEMBLY CRI/CRSG 32 - 48 MODELS WITH DUAL WHEELS 18 - Slide the pullow block hubs (2) onto the support of the articulation axle (3). • MAKE SURE THE CONNECTIONS ARE TIGHT, OBSERVING THE ALON- GATED HOLES ON THE PART TO ALLOW THIS AND BOLT FIX THE HUBS ON THE MAINS FRAME.
  • Page 22 25 - Instead of dual wheels, BALDAN launched a version with a large 400/60 traction tyre. The advantage of this version is that the same high flota- tion is provided, while the problem of collectiong rock, pieces of wood, or other debris as well as muddy earth between the tyres is, non existant.
  • Page 23 MOUNTING OF THE HITCH SYSTEM 29 - Attach the transversal (1) onto the main frame and fix the ends Figure 9 with the bolts (3) as illustrated in figure 9. There are a top and a bottom hole on the main frame that allow leveling of the tool bar that connects the harrow and the tractor.

  • Page 24: Hitching To The Tractor

    IMPORTANT The disc scraper (1) must be mounted maintaning a 10mm space from the disc. (Figure 10). 10 mm 31 - Most tractors have now height adjustment on the tractor hitch that makes levelling of the connection easier. DO NOT TRANSPORT PEOPLE ON THIS DRAW BAR AT ANY Figure 10 CIRCUMSTANCE ! ATTACH ON THE...

  • Page 25: Adjustments And Operations

    08. ADJUSTMENTS AND OPERATIONS TRANSPORT / WORK 01 - Before transporting or working with the harrow, do the following: TRANSPORT 02 - Remove the pin (1), flat washer (2) and cotter pin (3) from the header (4). 01 - To transport the harrow install the rod guide (#1 - Figure Figure 13 12), on the hydraulic cylinder, lock with the pin (#3) and hairpin (#4).
  • Page 26 DISK HARROW GANGS ADJUSTMENTS DISPLACEMENT ADJUSTMENT 01 - The following adjustments can be made for a better disk bla- 01 - This lateral displacement is used to center the harrow behind the tractor, nor- de penetration. In certain soil conditions, less penetration on mally when working in unleveled areas.
  • Page 27 Figure 15 HITCH TRANSVERSAL BAR ADJUSTMENT 01 - The transversal bar has two fixation points on the main frame, (1) and (2). It is important that the hitch beam, that connects implement and tractor, is level when in the operational posi- tion so the harrow “floats”...
  • Page 28 DISC FROM OPERATIONS OUTSIDE TO INSIDE 01 - Before the beginning of the season use clean off any dirt or grease that may have accumulated on moving parts. This will prevent abrasive action that could cau- Sulco se excessive wear, thoroughly inspect the disk for loose parts and adjust as neces- WORKING IN TERRAIN WITH CONTOUR DISCING DIRECTION...
  • Page 29 09. LUBRICATION TABLE OF EQUIVALENT AND GREASES 01 - The correct lubrication is very important for providing a high durability and good working of the rotating parts of the engine which will result in years of trouble-free from the disc Harrow. Manufacturer Grease Type 02 -...

  • Page 30: Lubrication Points

    10. LUBRICATION POINTS Number of Grease Nipple MAINTENANCE Part Name SCHEDULE Bearing 12 working hour Articulation shaft pins Wheel Rubs Clevis 60 working hour Hitch point Support Plate Articulation Hydraulic System 120 working hour Oil from the Bearing Nuts, Bolts, Pin 1200 working hour Bearing 1500 working hour...
  • Page 31 Figure 18 “A” Detail CRI/CRSG 32-36-40 and 44 discs 1 9 11 12 13 NOTE The CRI-R has self-lubricating bushings in After the first working the “A” clamping hub. These bushings do day with the implement, not require any type of grease or lubricant.

  • Page 32: Bearing Adjustments

    Figure 18 11. BEARING ADJUSTMENTS • When the bearings present looseness, adjust them on the follo- wing way: 01 - Take the washer out item 1 figure 18. 02 - Release the bolts item 2 and take the lid item 3 out. 03 - Take the joints 1 or 2 item 4, out of the lid bearing.
  • Page 33 13. HOURLY PRODUCTION OF THE CRSG / CRI / CRI-R 01 - To calculate daily production of the CRSG / CRI / CRI-R level harrow, use the following formula: FORMULA DATA: A = Area to be worked Cutting width ( meters ) A = L x V x F A = L x V x F V = Average tractor ( meters)
  • Page 34 02 - APPROXIMATE HOURLY PRODUCTION TABLE. Approximate Production Approximate Production Working Working Average Speed Working Working Average Speed Model Model (m/h) Width (mm) Hours (m/h) Width (mm) Hours Hectares Hectares CRSG - 12 1,30 7000 0,90 0,81 CRI - 12 1,50 7000 0,90...
  • Page 35 Approximate Production Working Width Average Speed Working Model (m/h) (mm) Hours Hectares CRI-R - 12 1,65 7000 0,90 1,04 CRI-R - 14 1,95 7000 0,90 1,23 CRI-R - 16 2,25 7000 0,90 1,42 CRI-R - 18 2,55 7000 0,90 1,60 CRI-R - 20 2,85 7000...
  • Page 36 14. IDENTIFICATION 01 - In order to refer parts catalogues or apply technical support from Baldan, always indicate model (1), serial number (2), manufacture date (3) loca- ted on the identification tag. ALWAYS REQUIRE BALDAN ORIGINAL PARTS • Look in your local, a reseller BALDAN, he will have in stock genuine parts.

  • Page 37: Product Identification

    NOTE: PRODUCT IDENTIFICATION • Do the identification below to always have the properly informations about your equipment life time. Owner: _______________________________________________________________ Dealer: _______________________________________________________________ Farm: ________________________________________________________________ City: ______________________________ Country: __________________________ Model: _______________________________________________________________ Warranty certified number: _______________________________________________ Serial number: _________________________________________________________ Purchase date: ___________ / __________/ ___________ _____________________ Invoice.

  • Page 38: Certificate Of Warranty

    07 - It is out of this term the product wich has repairs or modifications not made by dealers from Baldan’s network, as well as pieces applications or not authentic components to the product by the user.
  • Page 39 (in case of requested). 15 - Baldan keeps the right of changing and or improve the technical characteristics of its products, without notice and without the obligation of act like this way with its previously manufactured products.
  • Page 41 INSPECTION AND DELIVERY CERTIFICATE • SERVICE BEFORE THE DELIVERY: This equipment was very carefully prepared by the dealer’s organization, inspected in all its parts in agreement with the manufacture’s prescription. • DELIVERY SERVICE: The user was informed about the current guarantee terms and instructed about maintenance care and utilization. •...
  • Page 43 INSPECTION AND DELIVERY CERTIFICATE • SERVICE BEFORE THE DELIVERY: This equipment was very carefully prepared by the dealer’s organization, inspected in all its parts in agreement with the manufacture’s prescription. • DELIVERY SERVICE: The user was informed about the current guarantee terms and instructed about maintenance care and utilization. •...
  • Page 45 Owner: _______________________________________________________________ Phone: _______________________________________________________________ Adress: _______________________________________________________________________________________________________ Number: ______________________ City: _________________________________________________________________ State: ________________________________________________________________ E-mail: _______________________________________________________________________________ Date of sale: ___________________________________________ 3ª Page - Manufacturer _______________ Signature / Store’s stamp ________________________________________________________________ Please send this filled copy to Baldan, until 15 days after the purchase.

This manual is also suitable for:

Crsg 48Cri 32Cri 44Crsg-l 18Crsg-l 32Cri-r 12 ... Show all