Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Baldan Manuals
  4. Farm Equipment
  5. CRSG 32
  6. Instruction manual

Baldan CRSG 32 Instruction Manual

Hide thumbs Also See for CRSG 32:

Advertisement

Quick Links

Download this manual
CRSG
32-48
Trailled Offset Disc Harrow
CRSG-L
18-32
Trailled Offset Disc Harrow
Light
CRI
32-44
Drag Type Offset Disc Harrow Remote Control
CRI-R
12-26
Drag Type Offset Disc Harrow Remote Control
Strong

Advertisement

loading

Related Manuals for Baldan CRSG 32

Summary of Contents for Baldan CRSG 32

  • Page 1 CRSG 32-48 32-44 Trailled Offset Disc Harrow Drag Type Offset Disc Harrow Remote Control CRSG-L CRI-R 18-32 12-26 Trailled Offset Disc Harrow Drag Type Offset Disc Harrow Remote Control Light Strong...
  • Page 3 Any solicitation of warranty, please contact our Baldan technical service, by your Baldan dealer that you bought our implement. Reaffirm the necessity to read carefully of warranty certificate and note all of items from this manual, therefore you will increa-...
  • Page 4 18-32 12-26 Trailled Offset Disc Harrow Light Drag Type Offset Disc Harrow Remote Control Strong Escaneie o Código QR Code na BALDAN IMPLEMENTOS AGRÍCOLAS S/A. plaqueta de identificação do seu CNPJ: 52.311.347/0009-06 equipamento e acesse online este Insc. Est.: 441.016.953.110 Instruction Manual Manual de Instruções.
  • Page 5 Mounting of the hydraulic system and articulating wheel assembly CRSG-L 18 - 32 / CRI-R 12 - 26 models with single wheels ......................... Mounting of the hydraulic system and the articulating wheel assembly CRSG 32 - 48 / CRI 32 - 44 models with dual wheels........................

  • Page 6: Safety Rules

    01. SAFETY RULES THIS ALERT SYMBOL INDICATES IMPORTANT SAFETY NOTES. WHENEVER YOU FIND IT IN THIS MANUAL, READ THE MESSAGE WITH ATTENTION TO AVOID ANY ACCIDENT. WARNING WARNING WARNING WARNING • Read this instruction ma- • Only start the tractor opera- •...
  • Page 7 01. SAFETY RULES WARNING WARNING WARNING WARNING • Before any equipment •Do not work with the tractor if • Never weld the wheel mounted with • Before beginning the work or maintenance, make sure that the front bee without enough tire, the heat may cause air pressure transportation of CRSG/CRI/CRI-R, is properly stopped.
  • Page 8 01. SAFETY RULES WARNING WARNING WARNING • Hydraulic oil works under pressure and may cause serious injuries if • Always keep yourself distant from the • Remove the ignition key before per- there are any leakages. Periodically check the conservation status of active elements of the CRSG/CRI/CRi-R formin any type of maintenance the hoses.
  • Page 9 The incorrect handling of the tractor engine can result in serious or fatal accidents. Before using the read carefully the instructions in this ma- nual. Be sure that the person responsible for the operation is instructed about the correct handling and safety and has read and understood the instruction manual concerning this machine.
  • Page 10 Do not carry out adjustments with the implement working. When working over hilly areas try to keep the necessary stability. In case of instability reduce the acceleration, turn the wheels to the inclined side of the land and never lift the implement. Always use the tractor at safe speeds, especially when working in irregular or inclined areas, make sure the tractor is always in gear.
  • Page 11 TRAILLED OFFSET DISC HARROW - CRSG DRAG TYPE OFFSET HARROW REMOTE CONTROL - CRI DRAG TYPE OFFSET HARROW REMOTE CONTROL - STRONG - CRI-R 02. COMPONENTS 01 - Front disc gang 02 - Rear disc gang 03 - Central main frame 04 - Stabilizer bar 05 - Hydraulic cylinder 06 - Hydraulic hoses...

  • Page 12: Technical Specifications

    2260 140 - 150 Single Tables 1 Baldan reserves the right to modify any technical specifications without prior notice. The technical specifications it´s approximate and informed by regular conditions of work. Instruction Manual CRSG / CRI / CRI-R - 10...
  • Page 13 4748 260 - 278 Dual Table 2 Baldan reserves the right to modify any technical specifications without prior notice. The technical specifications it´s approximate and informed by regular conditions of work. Instruction Manual 11 - CRSG / CRI / CRI-R...
  • Page 14 3275 180 - 208 Single Table 3 Baldan reserves the right to modify any technical specifications without prior notice. The technical specifications it´s approximate and informed by regular conditions of work. Instruction Manual CRSG / CRI / CRI-R - 12...
  • Page 15 Figure 2 04. ASSEMBLY 01 - Check the amount of parts in the box using the parts list. 02 - Before starting the assembly wear gloves. 03 - Install on the shaft (1) the washer from the disc (2), the nut (3) locking washer (4), using the bolt (5), keep the nut in the same position of the shaft edge.
  • Page 16 07 - The figures 3 shows the assembley for each model of harrow. CRI-R 12 Blades CRI-R14 Blades CRI-R16 Blades CRSG-L/CRI-R 18 Blades CRSG-L/CRI-R 20 Discs CRSG-L/CRI-R 22 Blades CRSG-L/CRI-R 24 Blades CRI-R 26 Blades SYMBOL = BEARING = SPOOL = BLADES Figures 3 Instruction Manual...
  • Page 17 CRSG-L 28 Blades CRSG/CRSG-L/CRI 32 Blades CRSG/CRI 36 Blades Figures 3 CRSG/CRI 40 Blades CRSG/CRI 44 Blades CRSG/CRI 48 Blades Instruction Manual 15 - CRSG / CRI / CRI-R...
  • Page 18 Figure 4 ASSEMBLY OF FRONT AND REAR GANG 08 - Insert the front gang (1) figure 4 and rear (2), in safety terrain. 09 - Install the frame (3) over the gangs and attach using the bolts (4), lock (5), washer (6) and nut (7).
  • Page 19 10 - Lift a part of the grid (front or rear), place the set of discs in line, observing their arrangement in figure 5. Match the holes in the shoes with those in the bearings and assemble using the screws item 5 figure 5.
  • Page 20 Figure 8 MOUNTING OF THE HYDRAULIC SYSTEM AND ARTICULATING WHEEL ASSEMBLY CRSG-L 18 - 32 / CRI-R 12 - 26 MODELS WITH SINGLE WHEELS 14 - Coupling the hubs item 2 figure 8 on the articulation axis of the tires item 3 and fix the hub on the frame item 1 with the screws item 4.
  • Page 21 MOUNTING OF THE HYDRAULIC SYSTEM AND THE ARTICULATING WHEEL ASSEMBLY CRSG 32 - 48 / CRI 32 - 44 MODELS WITH DUAL WHEELS 17 - Couple the hubs item 2, figure 9, on the articulation shaft item 3, fix the hubs on the upright item 1 with the screws.
  • Page 22 MOUNTING OF THE HITCH SYSTEM 22 - Fix the complete coupling header item 1 figure 10 on the frame Figure 10 item 2 with screws and nut item 3. 23 - For CRI/CRSG from 32 to 48, insert the complete stabilizer rod item 4 between the upright plates, and fix the lower part of the rod to the crossbar through pin item 5.
  • Page 23 05. HITCH HITCHING TO THE TRACTOR 01 - To hitch the harrow to the tractor drawbar, observe their alignment, adjust the exact height on the harrow hitch and use hitch pin item 1, flat washer item 2 and cotter pin item 3, figure 11. 02 - Attach hoses item 4 to the tractor’s quick coupler.
  • Page 24 HITCHING TO THE TRACTOR (CRI 44 DISCS) - PART I The CRI 44 discs can be optionally purchased with header with traction chain; To attach it to the tractor drawbar, proceed as follows: 01 - Slowly approach the tractor to CRI 44 discs in reverse gear, paying attention to applying the brakes. Then, turn off the tractor engine, relieve the control pressure by activating the lever a few times and check if the couplings are clean, if not, clean them.
  • Page 25 HITCHING TO THE TRACTOR (CRI 44 DISCS) - PART II Then, take the smaller (6) and larger (7) adapter bushings from the packaging box that come with the CRI 44 discs and place them on 04 - the tractor hitch, as per detail “A”. Figure 13 Then slowly approach the tractor to CRI 44 discs in reverse gear, paying attention 05 -...
  • Page 26 HITCHING TO THE TRACTOR (CRI 44 DISCS) - PART III 07 - Afterwards, fix the traction chain (12) on the hitch header (5) and on the tractor only when transporting or working with the CRI 44 discs, figures 14. “B” ATTENTION The traction chain (12) provides greater safety during work or transport, preventing the CRI 44 discs from uncoupling from the tractor in case of breakage of the hitch pin (8).

  • Page 27: Adjustments And Operations

    06. ADJUSTMENTS AND OPERATIONS TRANSPORT / WORK 01 - Before transporting or working with the harrow, do the following: TRANSPORT 02 - Remove the pin (1), flat washer (2) and cotter pin (3) from the header (4). 01 - To transport the harrow install the rod guide (1) Figure 16 figure 15, on the hydraulic cylinder, lock with the pin (3) and hairpin (4).
  • Page 28 DISK HARROW GANGS ADJUSTMENTS DISPLACEMENT ADJUSTMENT 01 - The following adjustments can be made for a better disk blade 01 - This displacement must be adjusted when the harrow is not giving a perfect penetration. In certain soil conditions, less penetration on gangs finish, that is, leaving a trace of the tractor.
  • Page 29 Figure 19 CROSS BAR ADJUSTMENT 01 - The hitch arms are welded to the upright, which have two holes as shown in figure 19, whose main purpose is to level the harrow header in relation to the tractor’s drawbar. 1 - MORE PENETRATION 2 - LESS PENETRATION When engaged in the upper hole, penetration will be greater and, consequently, in the NOTE...
  • Page 30 DISC FROM OPERATIONS OUTSIDE TO INSIDE 01 - Before the beginning of the season use clean off any dirt or grease that may have accumulated on moving parts. This will prevent abrasive action that could cause Sulco excessive wear, thoroughly inspect the disc for loose parts and adjust as necessary.
  • Page 31 07. LUBRICATION TABLE OF EQUIVALENT AND GREASES 01 - The correct lubrication is very important for providing a high durability and good working of the rotating parts of the engine which will result in years of trouble-free from the disc Harrow. Manufacturer Grease Type 02 -...

  • Page 32: Lubrication Points

    08. LUBRICATION POINTS Table 4 Number of Grease Nipple MAINTENANCE Part Name SCHEDULE Bearing 12 working hour Articulation shaft pins Wheel Rubs Shaft hub Clevis 60 working hour Hitch point Support Plate Articulation Hydraulic System 120 working hour Oil from the Bearing Nuts, Bolts, Pin 1200 working hour Bearing...
  • Page 33 Figure 21 Detail CRI/CRSG 32-36-40 and 44 discs 1 10 12 13 14 After the first working day with the implement, re-tighten all the bolts and nuts. Instruction Manual 31 - CRSG / CRI / CRI-R...

  • Page 34: Bearing Adjustments

    Figure 22 09. BEARING ADJUSTMENTS • When the bearings present looseness, adjust them on the following way: 01 - Take the washer out item 1 figure 22. 02 - Release the bolts item 2 and take the lid item 3 out. 03 - Take the joints 1 or 2 item 4, out of the lid bearing.
  • Page 35 11. HOURLY PRODUCTION OF THE CRSG / CRI / CRI-R 01 - To calculate daily production of the CRSG / CRI / CRI-R level harrow, use the following formula: FORMULA DATA: A = Area to be worked Cutting width ( meters ) A = L x V x F A = L x V x F V = Average tractor ( meters)
  • Page 36 02 - APPROXIMATE HOURLY PRODUCTION TABLE. Approximate Production Approximate Production Working Working Average Speed Working Working Average Speed Model Model (m/h) Width (mm) Hours (m/h) Width (mm) Hours Hectares Hectares CRSG - 32 3,65 7000 0,90 2,30 CRI - 32 4,20 7000 0,90...
  • Page 37 03 - The formula to calculate the aproximate production refers to the work area performed by the harrow. 04 - If it is wished to know many hours it will take to harrow a known area, just devide the area by the hourly production of the equipment. Example: What is the time (X) necessary for a harrow with 32 discs to prepare 35 hectares at a medium tractor speed of 7 Km/hour? 05 - X = 35 Ha = 13 hours aproximately...
  • Page 38 12. IDENTIFICATION PRODUCT IDENTIFICATION 01 - In order to refer parts catalogues or apply technical support from Baldan, always indicate model (1), serial number (2), manufacture date (3) located on the identification tag. ALWAYS REQUIRE BALDAN ORIGINAL PARTS Code: 6055010377-2...
  • Page 39 PRODUCT IDENTIFICATION • Do the identification below to always have the properly informations about your equipment life time. Owner: _______________________________________________________________________________________________________________________________________ Dealer: _______________________________________________________________________________________________________________________________________ Farm: ________________________________________________________________________________________________________________________________________ City: _________________________________________________________________ Country: ________________________________________________________________ Warranty certified number: ____________________________________________________________ Serial number: ______________________________________________ Model: _________________________________________________________________________________________________________________________________ Purchase date: ___________ / __________/ ___________ _____________________ Invoice.
  • Page 40 NOTES:...
  • Page 41 NOTES:...

  • Page 42: Certificate Of Warranty

    The product is excluded from this term if it is repaired or modified by representatives not belonging to the BALDAN dealer network, as well as the application of non-genuine parts or components to the user’s product.
  • Page 43 INSPECTION AND DELIVERY CERTIFICATE SERVICE BEFORE THE DELIVERY: This equipment was very carefully prepared by the dealer’s organization, inspected in all its parts in agreement • with the manufacture’s prescription. • DELIVERY SERVICE: The user was informed about the current guarantee terms and instructed about maintenance care and utilization. •...
  • Page 45 INSPECTION AND DELIVERY CERTIFICATE SERVICE BEFORE THE DELIVERY: This equipment was very carefully prepared by the dealer’s organization, inspected in all its parts in agreement • with the manufacture’s prescription. • DELIVERY SERVICE: The user was informed about the current guarantee terms and instructed about maintenance care and utilization. •...
  • Page 47 Owner: _______________________________________________________________ Phone: _______________________________________________________________ Adress: _______________________________________________________________________________________________________ Number: ______________________ City: _________________________________________________________________ State: ________________________________________________________________ E-mail: _______________________________________________________________________________ Date of sale: ___________________________________________ 3ª Page - Manufacturer _______________ Signature / Store’s stamp ________________________________________________________________ Please send this filled copy to Baldan, until 15 days after the purchase.
  • Page 50 Instruction Manual...

This manual is also suitable for:

Crsg 36Crsg 40Crsg 44Crsg 48Crsg-l 18Crsg-l 20 ... Show all