Safety - Husqvarna PG 510 Operator's Manual

not breathe exhaust fumes. Always make
sure that there is good airflow.
This product is in compliance with
applicable EC directives.
Note:
Other symbols/decals on the product refer to
special certification requirements for some markets.
Rating plate
1
10
11
12
13
1. Product number
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
General safety instructions
WARNING:
instructions that follow before you use the
product. Save all warnings and instructions.
Refer to the warnings and instructions for
future work, if it is necessary.
4
2 3 4 5 6
Used if there is a risk of
Used if there is a risk of
Read the warning
2. Product weight
3. Rated power
4. Rated voltage
5. Rated current
6. Frequency
7. Enclosure
8. Maximum slope angle
9. Manufacturer/Importer
10. Serial number
11. Model
12. Production year
13. Scannable code
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
7
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
8
manufacturer or not approved by the manufacturer.
9
• the product is not repaired at an approved service
center or by an approved authority.

Safety

• The safety section gives basic directions on how
to use the product correctly. This information is
not an alternative for professional knowledge and
experience. If you are in a situation where you do not
feel safe, stop and get professional support. Speak
to your dealer, service agent or an operator with
experience. Do not try a task where you do not feel
sure.
• Keep work area clean and bright, this will decrease
the risk of accidents.
Safety instructions for operation
WARNING:
instructions that follow before you use the
product. Save all warnings and instructions
for future operations.
WARNING:
can cause circulatory damage or nerve
damage to persons with decreased blood
circulation. Get medical aid if you have
symptoms of overexposure to vibration.
These symptoms include numbness, loss
of feeling, tingling, pricking, pain, loss of
strength, changes in skin color or condition.
These symptoms usually show in the
fingers, hands or wrists.
Read the warning
Overexposure to vibration
1146 - 002 - 09.12.2022