Table of Contents
Advertisement
3.3
Digital Input
Insert an iDAQ module supporting digital input function to perform digital input mea-
surement. The following sections describe the digital input acquisition mechanism.
For detailed specifications of the functions, refer to the document of the corre-
sponded iDAQ module.
3.3.1
Digital Input Functions
There are two functions, interrupt and debounce filter other than the input value read-
ing function. This section lists all the details about these functions.
3.3.1.1
Digital Input Interrupt
All digital input channels can generate software interrupts (or events) to notice the
application about the state change of input signals. Interrupts can occur at rising
edge, falling edge, or both edges of the digital input signal as shown in Figure 3.3,
Figure 3.4, and Figure 3.5, respectively. The enable/disable interrupt function and the
selection of interrupt edges can be configured independently for each digital input
channel.
Figure 3.3 Digital input rising edge interrupts.
Figure 3.4 Digital input falling edge interrupts.
Figure 3.5 Digital input both edges interrupts.
21
iDAQ-731_751_763D User Manual
Advertisement
Table of Contents
