1.6
Application Software DAQNavi MCM
DAQNavi MCM is an application software focusing on high-speed data acquisition,
data monitoring and network access. It provides graphical interface for users to
achieve DAQ configuration, data pre-processing, feature extraction, user-defined for-
mula calculation and the output settings to upload data. All the settings could also be
saved to a project file for further parameter management. On top of that, the datalog-
ging function is also available in DAQNavi/MCM. All the data could be saved not only
in local storage, but also in remote storage.
By introducing the DAQNavi/MCM, the DAQ system could become an IoT-solution-
ready edge device. For more information, please search for DAQNavi/MCM on the
Advantech Support Portal (https://www.advantech.com/support).
1.7
FPGA Code Update
The FPGA can also be updated via the interface in Navigator. However, it isn't normal
to make an FPGA update. Advantech strongly suggests you to consult your technical
support before starting an FPGA update.
1.8
Ordering Information
iDAQ-731-AE
iDAQ-751-AE
iDAQ-763D-AE
1.9
Accessories
All of the followings are the accessories for iDAQ-751
PCL-10162-1E
PCL-10162-3E
ADAM-3962-AE
16-ch IDI and 16-ch Universal IDO iDAQ module
48-ch TTL Digital I/O iDAQ Module
16-ch SSR iDAQ module
DB-62 Shielded Cable, 1m
DB-62 Shielded Cable, 3m
DB-62 Wiring Terminal, DIN-rail Mount
5
iDAQ-731_751_763D User Manual