Dip Switches; Switching Between At And Bt Modes - Neousys Technology PCIe-PoE425bt User Manual

2.3

DIP Switches

PCIe-PoE425bt features individual per-port power on/off control via Neousys' API so you may
manually cut off or resume the power delivery to the connected PoE device. This feature is
designed for failure recovery in the field to reset connected devices. In case you have installed
multiple cards, there is a set of DIP switches (indicated in blue) for users to configure board ID. The
board ID can be used as a parameter in API to specify the card.
2.3.1

Switching Between at and bt Modes

The PCIe-PoE425bt card offers two power supply source methods. Users can choose between at
mode (IEEE 802.3at) or high at mode (IEEE 802.3bt) by configuring DIP switch 4.
Mode DIP Switch 4 Position
at
bt
PCIe-PoE425bt
Power Supplied
Internal 12V from gold finger
External 12V from 6-pin power connector
14