Advertisement
-
Each leg is equipped with a locking caster/wheel. If desired, they may be individually
locked by pushing down on the lock lever; to unlock, lift up the lever. (Fig. 11A, 11B)
Fig.
11A
Operation
-
Turn the On/Off switch to "ON"; adjust the light intensity by turning the adjustment
knob.
-
Make sure that the eyepieces are installed and that the head is secured by the
thumbscrews in the focusing mount.
1. Set the intended viewing spot of the examination to the center of view field using the
handles (Fig.12).
Fig. 11B
Fig. 12 (Articulating arm shown)
8
Advertisement
