Image Shift Adjustment - Optoma HD81 User Manual

(*): You can use

format setting chage
format 2 as 16:9 or
LBX, then format can
support image shift
function, too.
1) Press the "Menu" button on the remote.
2) Use " ", "
"Enter" or " ", then use "
"Format" adjustment item.
3) Press "Enter" or " " to select this adjustment item. The
Menu disappears as shown.
4) Use " ", "
5) Once you select Format 1 or 2 on the "Display" menu, any
other adjustments to the display that are made can be saved
upon exiting the "Display" mode. A reminder window
will appear asking for confi rmation.
6) User can save settings in the Format 1, 2, or choose "Exit/
Not Saved" to remove the settings. Once the user selects
"Not Saved", the settings are still temporary and kept until
user changes the aspect ratio, signal/channel or HD81
restart.

Image Shift Adjustment

▪ The HD81 has the ability to adjust the image position and size to
optimize its location on your display by using both an Image Shift
and Overscan feature.
▪ The function Image Shift can shift the input image up, down, left and
right, up to 100 pixels in each direction with Format 16:9, LBX, Format
1.(*)
1) Press the "Menu" button on the remote.
2) Use " ", "
"Enter" or " " to select this category. Use "
keys to highlight the "Image Shift" adjustment item.
3) Press "Enter" or " " to enter this adjustment item. A small
adjustment bar is shown, and the user may use the "
" ", " " and " " keys to move the image to best fi t the
display device screen.
4) Press the "Shift" button on the remote control to vertically
shift the image as well. No horizontal shift is possible from
the remote control.
User Controls
" to select DISPLAY category and press
", "
" arrow keys to choose the desired format.
" to highlight the DISPLAY category, press
" to highlight the
", " " arrow
35
",