Cleaning The Tool Holder; Using The Cleaning Pro- Gramme - Bosch COOKIT MCC9555CWC User Manual

Clean the pot with a dishwashing
3.
brush or soft cloth.
Rinse the pot with plain water.
4.
Dry the pot.
5.
19.10 Cleaning the tool
holder
Remove the tool holder.
1.
→ Page 92
Remove the silicone sealing ring
2.
from the tool holder.
Clean the silicone sealing ring with
3.
a soft cloth under running water.
Clean the tool holder with a brush
4.
under running water.
Dry all parts.
5.
Insert the tool holder with the silic-
6.
one sealing ring.
Turn the pot on its side.
7.
Tighten the threaded ring with
8.
wings as far as it will go.
a The symbols
Tip: You can clean the tool holder
and the silicone sealing ring in the
dishwasher.
Note: If cleaning in the dishwasher,
discolouration may occur on the tool
holder. This discolouration is harm-
less and does not impair functioning.
and line up.
Cleaning and servicing en
19.11 Using the cleaning pro-
gramme
Your appliance has a special clean-
ing programme to automatically pre-
clean the pot and the tool used after
cooking. The cleaning programme
heats, soaks and rinses the pot
quickly and simply.
Note: The cleaning programme is not
suitable for removing remnants of
dough.
Press "Automatic programmes".
1.
Press "Cleaning programme".
2.
To start the automatic programme,
3.
press "Start".
Follow the instructions on the dis-
4.
play.
95