Table of Contents
Advertisement
high-speed counting interrupt, which can meet different interrupt requirements.
Free switching of I/O points
XG series PLC has unique special functions. The technology developed for terminal damage
treatment can realize normal operation without changing the program.
C language editing function block
Using C language to write function blocks has better program confidentiality. At the same time, due to
the introduction of C language rich operation functions, it can realize various functions. It saves
internal space and improves programming efficiency.
PID function
The basic unit of XG series PLC also has PID control function, and can also carry out self-tuning
control.
Sequence BLOCK
In the sequential function block, the sequential execution of instructions can be realized, which is
especially suitable for pulse output, motion control, module reading and writing, and simplifies the
programming.
100 segments high speed counter interrupt
The high-speed counter of XG series PLC has 100 segments of 32-bit preset values, and each segment
can produce interruption. It has good real-time performance, high reliability and low cost.
PWM
XG1 series PLC has PWM pulse width modulation function, which can be used to control DC motor.
Frequency measurement
XG1 series PLC can measure the frequency.
Precise timing
XG1 series PLC can carry out precise timing, and the precise timer is a 1ms 32-bit timer.
Note: PLC can output high-speed pulses up to 200kHz, but it cannot guarantee the normal operation of all servo
systems. Please connect a resistance of about 500Ω between the output end and 24V power supply.
(3) Easy to programming
The programming of XG series PLC in Xinje PLC programming tool software
humanization of the software and its easy application.
Ladder diagram programming and instruction table programming can be switched and edited at any
time.
It has the functions of software component annotation, ladder diagram annotation, instruction prompt,
etc.
It provides a variety of editing panels for special instructions, which makes it more convenient to
write instructions.
Perfect monitoring mode: ladder diagram monitoring, free monitoring, soft component monitoring.
Multiple window display makes management more convenient.
6
※
1
can obviously feel the
Advertisement
Table of Contents
