I/O Board; Removing The Input/Output Board - Dell Vostro 15 3535 Owner's Manual

For systems shipped with a plastic chassis:
Steps
1. Place the I/O daughter board FFC on the palm-rest and keyboard assembly.
For systems shipped with a plastic chassis, slide and place the I/O daughter board FFC underneath the wireless card
antenna cables on the palm-rest and keyboard assembly.
2. Connect the I/O daughter board FFC the connector on the I/O board.
3. Connect the I/O daughter board FFC the connector on the system board.
Next steps
1. Install the fan.
2. Install the base cover.
3. Install the SD card.
4. Follow the procedure in

I/O board

Removing the Input/Output board

CAUTION: The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the SD card.
80 Removing and installing Field Replaceable Units (FRUs)
After working inside your
Before working inside your
computer.
computer.