− the regulations of the electrical power supply company or agency;
− any other local prescriptions.
1.6
SPECIAL REQUIREMENTS FOR THE INSTALLATION SITE
− The room in which the appliance is to operate must be well ventilated.
− In addition, it is good policy to locate the appliance under an extractor hood so that cooking vapours can
be removed rapidly and continuously.
− To connect directly to the network, it is necessary to provide a device ensuring disconnection to the
network, with a opening gap of contacts that allows complete disconnection in the conditions of
overvoltage category III in accordance with the rules of installation.
− This appliance requires one water connection. The line must be fitted with an on-off valve.
The electrical isolating switch and the water shutoff valves must both be located near
to the appliance, within easy reach for the user.
INSTRUCTION MANUAL FOR INSTALLATION, MAINTENANCE AND USE Rev-01BR.E080-
200-00-DU-GB-01
RECTANGULAR BRATT PANS ELECTRIC TYPE "BR8E080I - BR8E080I.M" "BR9E090I –
5
GB
BR9E090I.M" "BR1E120I – BR1E120I.M" "BR1E150I – BR1E150I.M" "BR1E160I –
BR1E160I.M" "BR1E200I – BR1E200I.M"