Magna-Matic MAG-8200 Series Quick Setup Manual

Quick Setup Guide
For all MAG-8200 Series Lawn Mower Blade Sharpeners
Unpack the machine and check components:
Box Contents: Sharpener, Grit Guard, Spanner Wrench, and Arbor Wrench
Assemble the grit guard.
1. Use ten self-tapping screws.
2. Assemble the grit guard sides to the top of the grit guard.
3. The grit guard sides are identical and the holes will only line up in one orientation. (top
vs bottom)
4. Then attach the bottom of the grit guard.
Assemble the grit guard to the MAG-8200
5. Remove the front cover (black cover with model decal on it) to expose the grinding
wheel as shown in images
6. Use two self tapping screws to connect the bottom of the grit guard to the black base of
the sharpener. The bottom of the grit guard is under the base of the sharpener, the put
the screws in from under the machine, see image to right.
7. Use two button head screws with nylon nuts to connect the top of the grit guard to the
red body.
8. Connect the crank handle to the end of the threaded adjustment rod with the set screw
in the crank handle base.
Purchase grinding wheels and other parts
and accessories at:
www.magna-matic.com
If you have any problems or
questions please call:
800-328-1110
For full instruction manual:
www.magna-matic-direct.com/instruction-manuals/
Magna-Matic Corporation - W4599 County Road IW - Waldo WI 53093 USA - Phone: (920) 564-2366 - FAX: (920) 564-2368 - Toll Free USA & Canada 1-800-328-1110
http://www.magna-matic.com - email: sales@magna-matic.com © Copyright 2023 All rights reserved
WARNING
CAUTION
Be sure the MAG-8200 power cord is unplugged. Using
a 5/16" socket wrench remove the (3) screws of the
front steel guard. Locate your spanner wrench and
arbor wrench (both supplied by Magna-Matic.) The
arbor wrench fits into a square notch in the arbor behind
the grinding wheel, and the spanner wrench fits into the
two holes in the arbor nut. See diagrams below.
Always inspect grinding wheels for possible damage
- never mount a cracked grinding wheel. DO NOT
OVER-TIGHTEN ARBOR NUT - ONLY LIGHT
PRESSURE TO TIGHTEN. The motor will tighten
the arbor nut every time the sharpener is turned on.
For optimum performance use only grinding wheels
specified by Magna-Matic. All NORTON® brand grind-
ing wheels sold by Magna-Matic are speed tested for
5500 RPM
NOTE: ARBOR HAS LEFT-HANDED THREADS.
MAG-8200 OEM WHEEL = 9000-35
WHEN USING ELECTRIC TOOLS, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, AND PERSONAL INJURY.
TURN OFF AND UNPLUG
BEFORE SERVICING
Page 1