Troubleshooting
Problem
Projector does not start
No picture
Color is faded
Picture is blurred
Picture noise appears.
Picture is green on
INPUT1 or 2 COMPONENT
62
Check
Projector power cord is not plugged into the wall outlet.
Remote control batteries have run out.
The selected input mode is wrong.
Cables may be incorrectly connected to the rear panel of the projector.
Power to the external connected device is off.
The video signal format of the video equipment is not set correctly.
Picture adjustments are incorrectly set.
Focus is incorrectly set.
The projection distance exceeds the focus range.
(PC input only)
Try "Auto tune".
Adjust the "Clock" setting.
Adjust the "Phase" setting.
Change the input signal type of the video equipment.