Table of Contents
Advertisement
3
Press
on the projector to
INPUT
select the INPUT
mode.
About the INPUT modes
Use this option to select
S-Video
the S-Video input source.
Use this option to select
Video
the composite video input
source.
Use this option to select a
Component
YPbPr, SDTV, or HDTV
1&2
component input source.
Use this option to select
DVI
the DVI input source.
Use this option to select
PC
the computer as an input
source.
Note
• When a signal is not received,
"Searching" will be displayed.
Note
• If you select "Auto" as the input
source, then the correct input source
is selected automatically.
4
Press
on the remote control
or
on the projector. Press
Enter to turn off the projector,
when the confirmation message
is displayed.
Note
• If you accidentally press power
and do not want to turn off the
projector, press Exit button or wait
until the confirmation message
disappears.
• Do not unplug the power cord during
projection or cooling fan operation.
This can cause damage due to the
rise in internal temperature, as the
cooling fan also stops.
MENU button
DVI/PC button
EXIT
ECO
Main Menu
Power button
,
,
,
buttons
EXIT button
Component 1 & 2 buttons
Video/ S-Video button
INPUT button
ENTER
STATUS
MENU
INPUT
INPUT
29
Advertisement
Table of Contents
