Table of Contents
Advertisement
Using the Remote Control
Available Range of the Remote Control
The remote control can be used to control the
projector within the ranges shown in the
illustration.
Note
• The signal from the remote control can be
reflected by the screen. You can control
the projector when it is behind you by
bouncing the signal off the screen.
When using the remote control:
• Do not drop it, or expose it to moisture or high
temperature.
• The remote control may not function correctly
under fluorescent lamps. Operate the projector
away from fluorescent lamps.
Inserting the Batteries
The batteries (two AA) are included in the package.
1
Press down the tab on the cover
and pull the cover towards the
direction of the arrow.
2
Insert the included batteries.
Make sure the polarities correctly match
the
and
marks inside the battery
compartment.
3
Insert the lower tab of the cover
into the opening, and press down
the cover until it clicks in place.
12
45°
23'(7 m)
30°
23'(7 m)
30°
45°
30°
Advertisement
Table of Contents
