Deinterlace
There are several different deinterlacing algorithms. Choose the setting that best matches the content you
are watching.
Select "Deinterlace" from the
"Options" menu on the menu screen.
For operating the menu screen, see
page 33.
Selected item
Enhances video by
replacing the edges of the
video with edges that have
steeper rise and fall times.
DCTI turns sloped or
sinusoidal waveforms into
DCTI
rectangular or square
waveforms with the same
duty cycles and peak-to-
peak amplitude. It is useful
for 4:1:1 video sources. The
range is from 0 to 7.
Identifies video artifacts
while in film mode. VOF
Video on film
attempts to repair the
(VOF)
artifacts using the low-angle
interpolator while remaining
in film mode.
Reproduces the image of
the film source clearly.
Displays the optimized
image of film transformed
Film Mode
with 3:2 pull down (NTSC
and PAL60Hz)or 2:2 pull
down (PAL 50Hz and
SECAM) enhancement to
progressive mode images.
Note
• In PAL50Hz or SECAM, the 2:2 pull down
enhancement is enabled only in film mode,
after the film source has been entered.
Description
Main Menu
49