Selecting The Picture Display Mode - Optoma HD7100 User Manual

Selecting the Picture Display Mode

You can modify the picture display mode to enhance the input image. Depending on the
input signal, you can choose "16:9", "4:3", "LBX" and "Native"
image.
Switching the Picture Display using
Different input signals
Press on the remote or
the projector and select a layout.
• Pressing cycles through the display
modes
Info
• In the Pixel to Pixel Mode, images are
displayed in the original resolution, and are
not scalable.
Aspect Ratio Function
You can control how the projector resizes the
input image.
The following option are available:
16:9
• Resolution 1280 × 720
• 4:3 input is stretched to fit 16:9 display
• Stretches entire image.
Native
• Maintains input signal resolution. May have
black borders around image.
4:3
• Resolution depends on the Input Signal
• 4:3 input scaled to fit display height
• Width scaled to maintain 4:3 aspect ratio
• Black bars on left and right (taking up 25% of
the whole display)
LBX
• Resolution 1280 × 720
• 4:3 input scaled to fit display width
• Height scaled to maintain 4:3 aspect ratio:
1280 × 960
• 25% of the entire image on the top and bottom
is cropped.
40
on
Aspect Ratio
Main Menu