Malone SaddleUp PRO MPG110 Installation & Loading Instructions

Kayak Carriers
Installation & Loading Instructions - Please Read Before Beginning
IMPORTANT WARNING: All vehicular transports are potentially hazardous. Any person(s) using Malone products are personally responsible for
following the given directions for use and/or installation and accepts full responsibility for any and all damages or injury of any kind including death,
1
which may result from their use and/or installation.
It is critical that all Malone racks and accessories be properly and securely attached to your vehicle. Improper attachment could result in a serious
accident, and could cause serious bodily injury or death to you or to others. You are responsible for securing the racks and accessories to your car,
checking the attachment's prior to use, and periodically inspecting the products for adjustment, wear, and damage.
You must read and understand all of the instructions and cautions supplied with your Malone products(s) prior to installation or use. If you do not
understand all of the instructions and cautions, or, if you have no mechanical experience and are not thoroughly familiar with the installation
procedures, you should have the product installed by a professional installer.
. Insert Mounting Bolt through one hole of a Jawz adapter.
Insert washer and loosely apply a T-knob. See image 2.
MALONE
SaddleUp PRO SaddleUp PRO
MPG111MD
MPGMD109-F
Kayak Carrier
MALONE
DownLoader DownLoader
J-STYLE FOLDING KAYAK CARRIER
Step 1: Installing the Carriers onto the Cross Rails
. Insert a mounting bolt into the right side hex hole. See image 1.
Load Straps Jawz Universal Adapters
. Prior to installation, insert a bolt into the mounting holes in
. Insert mounting bolt through one hole of a Jawz mounting adapter and l
apply T-knob. See image 2.
. Insert a Mounting Bolt into one mounting hole from the top
. Insérez un boulon de fixation dans l'un des trous hexagonaux
. Place the carrier onto the front cross rail with the bottom rounded side to
Base Pad
outside of the vehicle. Swing the Jawz under the cross rail as shown. See
Covers
MALON
TM
UNIVERSAL KAYAK CARRIERS
MPGMD109-R
Kayak Carrier
Please Read Before B
For SaddleUp Pro MPG109MD-F, set of 2: Fo
For SaddleUp Pro MPG109MD-R, set of 2: Fo
TM
For SaddleUp Pro MPG110MD, set of 4: Foll
70mm
60mm
Mounting Bolts
the bottom of the carriers. Push upward to open the two
mounting hole covers located in the Base pads.
side. Rotate and close the mounting hole cover.
See image 1.
situés sur le côté supérieur du support.
(Figure 1)
2
R
Installation & Loa
12' Load Straps Jawz Universal Ad
R
TM
TM
TM
Mounting Bolt Washers
T-Knobs 12' Safety Lines
TM
TM
8818
MPG110
TM