Malone SaddleUp PRO Series Installation & Loading Instructions

MPGMD109-F
Kayak Carrier
Installation & Loading Instructions: Please Read Before Beginning:
For SaddleUp Pro MPG109MD-F, set of 2: Follow instructions 1-6.
For SaddleUp Pro MPG109MD-R, set of 2: Follow instructions 7-11.
For SaddleUp Pro MPG110MD, set of 4: Follow instructions 1-20.

Step 1: Installing the Carriers onto the Cross Bars

. Insert a mounting bolt into the right side hex hole. See image 1.
. Insert mounting bolt through one hole of a Jawz adapter and loosely
apply T-knob. See image 2.
. Place the carrier onto the front cross rail with the bottom rounded side
towards the edge of the roof. Swing the Jawz under the cross bar
as shown. See image 3.
. Insert a mounting bolt into the left side hex hole and down through the
Jawz adapter. See image 4.
TM
MALONE
SaddleUp PRO SaddleUp PRO
MPGMD109-R
Kayak Carrier
12' Load Straps
TM
TM
TM
TM
TM
TM
UNIVERSAL KAYAK CARRIERS
40mm
Jawz Adapters TM Mounting Bolts
R
50mm
12' Bow & Stern Lines
1
Mounting
Bolt
2
T-knob
Jawz
3
Roof
Edge
4
Mounting
Bolt