Table of Contents
Advertisement
2.
Intel
X79 Serial ATA 3.0 Gb/s connectors (7-pin SATA3G_1; SATA3G_2;
®
SATA3G_3; SATA3G_4 [black])
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical disc
drives via Serial ATA 3.0 Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel
chipset.
•
These connectors are set to [AHCI Mode] by default. If you intend to create a Serial
ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID
Mode]. Refer to section 3.6.5 SATA Configuration for details.
Before creating a RAID set, refer to section 5.1 RAID configurations or the manual
•
bundled in the motherboard support DVD.
ASUS RAMPAGE IV BLACK EDITION
Rapid Storage Technology through the onboard Intel
®
X79
®
1-39
Advertisement
Table of Contents
