Asus RAMPAGE IV BLACK EDITION User Manual page 130

Bootup NumLock State [On]
[On]
[Off]
Wait For 'F1' If Error [Enabled]
[Disabled]
[Enabled]
Option ROM Messages [Force BIOS]
[Force BIOS]
[Keep Current]
Setup Mode [Advanced Mode]
[Advanced Mode]
[EZ Mode]
3-40
Set the power-on state of the NumLock to [On].
Set the power-on state of the NumLock to [Off].
Disables the function.
The system waits for the <F1> key to be pressed when error occurs.
The third-party ROM messages will be forced to display during the boot
sequence.
The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
Sets Advanced Mode as the default screen for entering the BIOS
setup program.
Sets EZ Mode as the default screen for entering the BIOS setup
program.
Chapter 3: BIOS setup