CPS VORTECH 2 Quick Start Manual

None-Flutter Gauge /
Rugged metal housing
Front Calibration
Access Port
Large
Easy-to-Grab
Knobs
Sightglass
ONLY QUALIFIED SERVICE PERSONNEL SHOULD OPERATE THIS UNIT. MOST STATES,
COUNTRIES, ETC... MAY REQUIRE THE USER TO BE LICENSED. PLEASE CHECK WITH YOUR
Danger-
Avoid breathing refrigerant vapors and lubricant vapor or mist. Breathing high concentration levels
may cause heart arrhythmia, loss of consciousness, or even cause suffocation. Exposure may irritate eyes,
nose, throat, and skin. Please read the manufacturers Material Safety Data Sheet for further safety informa-
tion on refrigerants and lubricants.
Danger- EXPLOSION RISK
this manifold with Oxygen.
Danger- EXPLOSION/RUPTURE RISK.
ide or other very high pressure gasses. Unregulated gasses can cause components in a refrigeration system
to rupture. Severe Injury or Death can occur.
Caution-
all hoses may contain liquid refrigerant under pressure. Contact with refrigerant may cause frost-
bite or other related injuries. Wear proper personal protective equipment such as safety goggles and gloves.
When disconnecting any hose, please use extreme caution.
1. The right side hand knob (red) will control the flow to the right side port.
2. The left side hand knob (blue) will control the flow to the left side port.
3. The center port is used from common connection to vacuum pump, recovering unit or refrigerant
supply tank. The center port is also equipment with a tee fitting with valve core. This allows for dual
hook up between vacuum pump and refrigerant supply tank.
4. Low Pressure gauge measures pressure on the left side port with the left side valve closed.
5. High Pressure gauge measures pressure on the right side port with the right side valve closed.
VORTECH
OPEN
CLOSE

GENERAL SAFETY INSTRUCTIONS

LOCAL GOVERNMENT AGENCY.
. Use extreme caution when working with flammable refrigerants. Never use
DO NOT use this manifold with unregulated nitrogen, carbon diox-

2 WAY MANIFOLD FUNCTION

™
2 VALVE
MANIFOLD
OPEN
CLOSE
Protective Rubber
Gauge Boot
Anodized Aluminum
Block Body
45˚ Fittings for proper
storage of hoses when
not in use. Extra
common port
Extra Port with Valve Core