Mounting - Onkyo RF-EX6 Instruction Manual

Installation

Mounting

The RF Receiver can be mounted to a ceiling, a
rack, etc. using the included mounting plate and
the 4 screws. Take into account the range and
the working angle of the IR blaster as explained
on p. 4. Also make sure to place the RF Receiver
in a central position aimed directly at your de-
vices.
Note:
It is adviced not to place the RF Receiver inside
a metal closet as RF signals can be disturbed by
metal objects.
1 Screw the plate to a rack, closet, etc.
Provide sufficient space to connect the
power adapter and to slide the RF Receiver
back on.
Note:
Depending on the surface, it may be possible
to attach the RF Receiver to the ceiling, the
rack, etc. using a piece of 2-sided tape. Look
for the right position and make sure there is
sufficient space.
2 Slide the RF Receiver on the
mounting plate.
5