Control Panel Functions; Important Notes - Seecode 20310 Manual

Control panel functions

Vibration massage mode display
Press this button
ing massage mode by pressing it repeatedly.
The vibrating massage function can be switched on independently of the heat function.
Vibrating massage mode indicator:
When massage mode 1 is started, the first LED indicator lights up.
When massage mode 2 is set, the second LED indicator lights up.
When massage mode 3 is set, the last LED indicator lights up.
Press this button
level changes.
The heat function can be switched on independently of the vibrating massage function.
Slowly flashing LED light indicates a low heat level.
Rapidly flashing LED light indicates a medium heating level.
Steady LED light indicates a high heating level.
Different ambient temperatures and also the temperature of the respective human body can
influence the heating function.

Important notes

The heating function and the vibration massage can be used independently of each other.
The maximum temperature is approx. 48 degrees Celsius.
The heat and massage waistcoat switches off automatically after 15 minutes.
Do not place or use the appliance in a bathroom or similar wet/damp area.
Make sure that the appliance is not exposed to direct sunlight or placed near heat sources.
The heat and massage waistcoat can produce a warming effect. However, it is not intended for
use as a therapeutic heating pad. Please wait a few minutes until the maximum temperature is
reached.
10
2
to switch the heat and massage waistcoat on or off and to select the vibrat-
to switch the heat function on or off. Each time you press it again, the heat
1
3