Kidco Safeway G2000 Hardware Installation

Table of Contents

Download this manual

U S E R G U I D E

G2000

Safeway

H A R D W A R E M O U N T I N S TA L L AT I O N

Fits openings 24.75" – 43.5"

G2001

Parts list

A Hinge side template

B Locking side template

C Lower hinge bottom

D Lower hinge spindle

E Spring

F Lower hinge cap

G Upper hinge

H Upper hinge spindle

I-J Screw/Screw socket

K Wood screws

L Locking latch bracket

M Lower latch bracket

N Locking latch spindle

O Stop pin

P Wrench

I-J

Table of Contents

Do you have a question about the Safeway G2000 and is the answer not in the manual?

Page 1 U S E R G U I D E Parts list A Hinge side template B Locking side template G2000 G2001 C Lower hinge bottom D Lower hinge spindle E Spring F Lower hinge cap G Upper hinge H Upper hinge spindle I-J Screw/Screw socket K Wood screws L Locking latch bracket...
Page 2 Safeway U S E R G U I D E G2000/G2001 ® Installation Finding appropriate width of gate Important: Gate must be installed in a Adjust sections until gate is approximately structurally sound opening. The hinge side the correct width and adjustment holes are of gate must be mounted to a rigid surface.
Page 3 Safeway G2000/G2001 U S E R G U I D E ® Locking Side Mounting Screw locking latch spindles (N) into Screws provided are for mounting top and bottom rails of second gate directly into wood. If mounting into section. Extend spindles equally. Final brick, drywall or other surfaces, use spindle adjustments will be made later.
Page 4 Safeway U S E R G U I D E G2000/G2001 ® If adjusting the spindles does not Center gate in opening. Adjust upper achieve the correct length, it may be hinge spindle (H) so post ﬁts into upper necessary to lift gate off hinges and hinge hole (G).
Page 5 Use only spare parts available • To open gate, press down on locking latch mountings regularly from KidCo ® with thumb and lift gate out of upper and lower brackets. To lock gate, top locking To prevent serious injury or death, •...

Safeway g200101