Practical Information - RCA RDW2480 Owner's Manual

24" front control, 57 dba, stainless steel built in dishwasher
Table of Contents

Advertisement

Available languages

Available languages

AUTOMATIC FAULT WARNINGS AND WHAT TO DO
TROUBLE
POSSIBLE FAULT
CODE
Water inlet system failure
FF
Pressure system failure
F5
Continuous water input
F3
Inability to discharge water
F2
F8
F1
FE
Faulty electronic card
F7
F9
Divisor position error
F6
Faulty heater sensor
HI
High voltage failure

11. PRACTICAL INFORMATION

1. When the machine isn't in operation:
• Disconnect the plug and close the tap.
• Leave the door slightly open to prevent odour formation.
2. Select the dry option to remove water droplets.
3. Place dishes in the machine properly to achieve the best energy consumption, washing
and drying performance. Please see the program and consumption table for more
information.
4. Rinse dirty dishes before placing them in the dishwasher.
5. Only use the Rinse program when necessary.
6. Do not place the machine near a refrigerator because it will reach high temperatures.
7. If the machine is located in an area that is at risk of freezing, close the tap, disconnect
the inlet hose from the tap and drain the water inside the hose and the machine
completely. penses outside the metropolitan region.
34
Make sure the water inlet tap is open and water is flowing.
Separate the inlet hose from the tap and clean the filter of
Heater error
Overflow
Overheating
WHAT TO DO
the hose.
Contact for service if the error continues.
Contact for service.
Close the tap and contact for service.
Water discharge hose and filters may be clogged.
Cancel the program.
If the error continues, contact for service.
Contact for service.
Unplug the machine and close the tap.
Contact for service.
Contact for service.
Contact for service.
Contact for service.
Contact for service.
Contact for service.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents