RCA RDW2480 Owner's Manual page 22

Top Basket
Rack with height adjustment
These racks are designed to increase the
capacity of top basket. You can place your
cups and glasses on these racks. Thanks
to adjustable feature of the racks, you can
place glasses of different sizes under the
racks.
Height adjustment plastics mounted on the
basket allow racks to be in 2 different
positions.
You can also place long knives, forks and
spoons on these racks horizontally for
them not to block the movement of spray
arms
Top basket horizontal wire located on top
basket allows you to place your plates
and bowls where required. Also you can
wash kitchenware such as pan or pot by
closing the horizontal wire.
22
NOTICE: Bringing the
wires to the horizontal
position by holding them
from the tips may cause
them to bend. Therefore, it
will be appropriate to bring
the wires in the middle to
horizontal or vertical posi-
tion by holding them from
their stems and pushing.
The basket height adjustment mechanism
on the top basket of your machine is
designed to let you adjust the height of
your top basket upwards or downwards,
without removing it from your machine
when it is full, and create large spaces at
the top or bottom area of your machine as
needed. Basket of your machine is set to
upper position in factory settings. In order
to raise your basket, hold it from both
sides and pull it upwards. In order to lower
it, hold it from both sides again, and leave
it. In loaded basket adjustment
mechanism, make sure that both sides are
in the same position.
(up or down)
NOTICE: Make sure that
both levers catch in the
same height position.