Input/Output Assign - Onkyo HT-RC370 Instruction Manual

Input/Output Assign

Main Menu
Monitor Out
■
Resolution
Through:
Select this to pass video through the AV receiver at
the same resolution and with no conversion.
Auto:
Select this to have the AV receiver automatically
convert video at resolutions supported by your TV.
480p (480p/576p), 720p, 1080i, 1080p
Select the desired output resolution.
1080p/24:
Select this for 1080p output at 24 frames per second.
4K Upscaling:
Select this for an output resolution four times that of
1080p, resulting in 3840 × 2160 pixels.
You can specify the output resolution for the HDMI OUT
and have the AV receiver upconvert the picture resolution
as necessary to match the resolution supported by your
TV.
Note
• Depending on the incoming video signal, the video playback
may not be smooth or the vertical resolution may be lowered. In
this case select anything other than "1080p/24".
En
44
Input/Output Assign
HDMI Input
If you connect a video component to an HDMI input, you
must assign that input to an input selector. For example, if
you connect your Blu-ray Disc/DVD player to HDMI
IN 2, you must assign "HDMI2" to the "BD/DVD" input
selector.
If you've connected your TV to the AV receiver with an
HDMI cable, composite video, S-video and component
video sources can be upconverted
HDMI output. You can set this for each input selector by
selecting the "- - - - -" option. See "Video Connection
Formats" for more information on video signal flow and
upconversion (➔ page 81).
Composite video, S-Video,
component video
OUT
Composite video, S-Video,
component video
Here are the default assignments.
Input selector
BD/DVD
VCR/DVR
CBL/SAT
GAME
PC
AUX
TV/CD
PHONO
PORT
■
BD/DVD, VCR/DVR, CBL/SAT, GAME, PC,
TV/CD, PHONO, PORT
HDMI1, HDMI2, HDMI3, HDMI4, HDMI5,
HDMI6:
Select a corresponding HDMI input to which the
video component has been connected.
- - - - -:
Output composite video, S-Video, and component
video sources from the HDMI output. The video
output signal from the HDMI output is the one
configured in "Component Video Input"
page 45).
(➔
*1 If you connect your personal computer to PC IN (Analog
RGB), you must assign "- - - - -" to the "PC" input selector.
Each HDMI input cannot be assigned to two input
selectors or more. When HDMI1 - HDMI6 have already
been assigned, you must first set any unused input
selectors to "- - - - -" or you will be unable to assign
HDMI1 - HDMI6 to other input selectors.
* and output by the
HDMI
IN
HDMI
Default assignment
HDMI1
HDMI2
HDMI3
HDMI4
HDMI5 *1
FRONT (Fixed)
- - - - -
- - - - -
- - - - -