Table of Contents
Advertisement
5
Disturbance recorder (DRP)
Disturbance recorder (DRP)
Evaluation of the results from the disturbance recording function requires access to an
SMS workstation either permanently connected to the terminal or temporarily connect-
ed to the serial port on the front. The following software packages must be installed in
the workstation:
SMS-BASE
Common functions
RECOM
Collection of the disturbance data
REVAL
Evaluation and printouts of the recorded data
It could be useful to have a printer for hard copies. The behavior of the disturbance re-
cording function can be checked when protective functions of the terminal are tested.
When the terminal is set to operate in test mode, there is a separate setting for operation
of the disturbance report, which also affects the disturbance recorder.
A manual trig can be started any time. This results in a snap-shot of the actual values of
all recorded channels.
Chapter 11
Verifying settings by secondary
injection
79
Advertisement
Table of Contents
