Jetson JetKart 2.0 Manual page 18

6. WORKING FROM THE OUTSIDE IN TOWARDS THE
CENTER, INSERT ONE CLAMP STEM (WITH A
SILVER WASHER AND PLASTIC WHITE WASHER
STILL ON IT) THROUGH THE TWO HOLES ON THE
UNDERSIDE OF ONE OF THE CLAMP BRACKETS.
7. SLIDE A WHITE WASHER ONTO THE END OF THE
CLAMP STEM SO THAT THE SMALLER SIDE OF
THE WASHER IS FACING IN.
8. HOLD A KNOB IN POSITION AT THE HOLE
FACING CLAMP STEM AND TWIST THE
LATCH CLOCKWISE INTO THE KNOB.
CLAMP LATCH
16
FRONT FRAME (B)
WHITE PLASTIC
WASHERS
CLAMP STEM
SILVER WASHER
REAR FRAME (A)
CLAMP KNOB