Table of Contents
Advertisement
Attaching the Seat
1.2
1. ALIGN HOLES IN SEAT TO THE FOUR MATCHING HOLES ON
SMALL BOLT
THE REAR FRAME (A).
2. INSERT A SMALL BOLT THROUGH EACH SET OF ALIGNED HOLES.
3. GENTLY TWIST A SMALL NUT ONTO THE END OF EACH BOLT.
4. STABILIZE THE POSITION OF A NUT WITH THE WRENCH AND
TIGHTEN THE BOLT INTO IT USING THE SMALL ALLEN KEY.
5. REPEAT TO TIGHTEN THE OTHER THREE BOLT/NUT COMBOS.
IMPORTANT: DO NOT OVER-TIGHTEN THE BOLTS.
OVER-TIGHTENING CAN CAUSE THE SEAT TO CRACK.
SMALL NUT
REAR FRAME (A)
12
Advertisement
Table of Contents
Need help?
Do you have a question about the JetKart 2.0 and is the answer not in the manual?