Table of Contents
Advertisement
3. CONTINUE PUSHING IN THE FRONT FRAME
TUBES UNTIL THE PINS POP INTO PLACE IN THE
FIRST PIN HOLES ON THE REAR FRAME TUBES.
4. UNSCREW AND REMOVE THE KNOBS FROM EACH
FRAME CLAMP. SET ASIDE.
5. REMOVE ONE WHITE WASHER OFF OF EACH
FRAME CLAMP AND SET ASIDE WITH THE KNOBS.
LEAVE THE SILVER WASHER AND REMAINING
WHITE WASHER ON THE CLAMP STEM.
WHITE PLASTIC
WASHERS
CLAMP STEM
CLAMP KNOB
15
Advertisement
Table of Contents
Need help?
Do you have a question about the JetKart 2.0 and is the answer not in the manual?