Jetson JetKart 2.0 Manual page 13

3. INSERT A LARGE BOLT THROUGH THE TOP OF THE ALIGNED
HOLES ON ONE SIDE OF THE FRAME.
4. GENTLY TWIST A NUT ONTO THE END OF THE BOLT.
5. STABILIZE THE POSITION OF THE NUT WITH THE WRENCH AND
TIGHTEN THE BOLT INTO IT USING THE LARGE ALLEN KEY.
6. REPEAT ON THE OTHER SIDE WITH THE OTHER HANDLE.
7. MAKE SURE THAT BOLTS AND NUTS ARE TIGHT AND THE HANDLE
SUPPORTS ON BOTH SIDES ARE SECURED TO THE FRAME.
LARGE BOLT
LARGE NUT
11