Table of Contents
Advertisement
STANDBY/ON
STANDBY
MULTI CH
DVD
PHONES
A
SPEAKERS
B
TONE
Positioning the XM Mini-Tuner System
You can check the signal strength of the XM radio signal
and adjust the position of the XM Mini-Tuner System
accordingly.
1
On the AV receiver, press the
[SETUP] button.
SETUP
2
Use the TUNING Up and Down
[ ]/[ ] buttons to select "ANT
TUNING
PRESET
Aiming," and then press
[ENTER].
3
Adjust the position of the XM
Mini-Tuner Antenna so that the
SAT signal strength bar is as
long as possible.
The best signal is achieved when the
antenna is pointing to the southern sky
through an unobstructed window.
If you cannot receive a satellite signal,
press the Down [
the terrestrial (TER) signal strength
meter and adjust your XM Mini-Tuner
System so that the bar is as long as pos-
sible.
Terrestrial signals are only available in
certain areas.
So long as the signal strength is good,
you can enjoy XM Radio by using
either satellite or terrestrial reception.
6
ENTER
TUNING
TUNING
PRESET
VCR/DVR
CBL/SAT
AUX
TAPE
TUNER
C D
SETUP
ENTER
RETURN
SETUP MIC
VIDEO
STEREO
LISTENING MODE
DISPLAY
DIGITAL INPUT
DIMMER
MEMORY
TUNING MODE
CLEAR
SETUP
] button to display
XM Radio Messages
The following messages may appear while using XM
radio.
MASTER VOLUME
❑ CHECK ANTENNA
AUX INPUT
L
AUDIO
R
The XM antenna is not properly connected to the
Mini-Tuner Dock. Check the connection. Check the
antenna cable for damage.
❑ UPDATING
XM is updating your Mini-Tuner with the latest
encryption code. Simply wait a few seconds until the
update is done. OR, You may be attempting to tune
to a channel that is blocked or that you cannot
receive with your subscription package. To receive
that channel, contact XM Satellite Radio.
❑ NO SIGNAL
The XM Mini-Tuner can not receive the satellite sig-
nal. Check the XM antenna for obstructions to the
southern sky. Check the antenna positioning with the
Antenna Aiming feature.
❑ LOADING
The AV receiver is tuning or decoding audio or text
data. Please wait. If this occurs often, check the XM
antenna position with the Antenna Aiming feature.
❑ OFF AIR
The XM channel you selected is not currently broad-
casting. Select another channel.
❑ UPGRADE XM TUNER
The connected XM CNP-1000 is incompatible. The
AV receiver features advanced technology that is
designed for use with the XM Mini-Tuner. Contact
XM Listener Care and ask about upgrading your XM
CNP-1000 to an XM Mini-Tuner. Have the AV
receiver's model name and CNP-1000 XM ID num-
ber ready beforehand, and explain that the AV
receiver is displaying the message "Upgrade XM
Tuner." If you already have an XM Mini-Tuner con-
nected and you see this message, turn off the AV
receiver, make sure the XM Mini-Tuner is properly
seated in the Mini-Tuner Dock, and then turn the AV
receiver back on again. If the message reappears,
Advertisement
Table of Contents
