Windows 2000: Modifying A Workgroup Name - Hercules HWGEXT-54-LB Manual

3.11.5. Windows 2000: Modifying a workgroup name

It may happen that you need to change the name of your workgroup (advanced users only). To do so,
proceed as follows:
7. If you wish, set the shared printer as the default printer,
then click Next.
8. Click Finish to close the Wizard.
You can now use the network printer thanks to your WiFi
connection. For more information on sharing a printer, please
refer to your printer's manual.
1. Click Start/Settings/Control Panel.
System.
2. In the System Properties window, select the
Network Identification tab.
3. Click the Properties button.
4. In the Computer name zone, enter a name
sufficiently distinctive that it can easily be recognized
in the list of computers for the
computer, wifi-computer or julie, for example).
5. In the Workgroup zone, enter a name for the group
(HOME, OFFICE or HERCULES, for example).
The workgroup name must be identical (be sure to
respect the case of letters) for all computers you wish to
link together in a network.
6. Click OK. A Windows message indicates that the
task has been carried out successfully and that you
must restart the computer.
7. Repeat this procedure for each computer.
Hercules HWGEXT-54-LB
Double-click
workgroup (my-
User Manual – 55/82