Safety Instructions
Unauthorized alterations to the instrument or
noncompliant use shall void all rights to any
warranty claims!
Installation location
Refer to the "Safety Concept" brochure.
Ϙ
Electrical components must be placed at
Ϙ
least 10 cm away from the wall and from
flammable substances.
Avoid large temperature fluctuations,
Ϙ
direct sunlight and vibrations. These condi-
tions can distort measurements and micro-
graphic images.
In warm and warm-damp climatic zones,
Ϙ
the individual components require special
care in order to prevent the build-up of
fungus.
Leica SmartTouch™
Requirements to be met by the operator:
Refer to the "Safety Concept" brochure.
Ϙ
Ensure that:
The Leica SmartTouch™ is operated, main-
Ϙ
tained and repaired only by authorized and
trained personnel.
All operators have read, understood and
Ϙ
observe this user manual, and particularly
the safety regulations.
Repairs, service work
Refer to the "Safety Concept" brochure.
Ϙ
Only original Leica Microsystems spare
Ϙ
parts may be used.
Before opening the instruments, switch off
Ϙ
the power and unplug the power cable.
Touching the live electric circuit can cause
Ϙ
injury.
Manual
Transport
Use the original packaging for shipping or
Ϙ
transporting the Leica SmartTouch™.
In order to prevent damage from vibrations,
Ϙ
disassemble all moving parts that (accord-
ing to the user manual) can be assembled
and disassembled by the customer and
pack them separately.
7