Changing The Reference Coordinates - Leica SmartTouch Manual

Changing the Reference Coordinates

The coordinates of the motorized
mechanical stage are based either on the
bottom left corner of the stage or a zero point
defined by the user.
Leica SmartTouch™
Changing the reference coordinates
1. Touch the "Stage" tab.
2. Touch the desired measurement method:
Absolute reference point (left symbol):
Ϙ
Shows the distance between the bottom
left corner and the current position.
Manual
Relative reference point (right symbol):
Ϙ
Shows the distance between the current
position and the zero point defined by the
user.
(Continued on next page)
47