Switching The Signal Tone On And Off - Leica SmartTouch Manual

Switching the signal tone on and off

The Leica SmartTouch™ confirms each
touch of the display and each turn of the
double rotary actuator with a signal tone. This
signal tone can be switched off if necessary.
Leica SmartTouch™
Switching the signal tone on and off
1. Touch the "Config." tab.
2. Touch the button for the SmartTouch™
settings.
3. Touch the button for the signal tones.
4. Touch the desired symbol to switch the
signal tones off and on again.
Manual 31