Burners; Lighting The Burners - Backyard Pro 554BPGST2WLP User Manual

14 |Burners

LIGHTING THE BURNERS

NOTE:
Do not use spirits, gasoline or other flammable material for lighting.
LIGHTING THE BURNERS USING ELECTRONIC IGNITION:
1. Turn ALL control knobs to OFF position.
2. Turn gas supply on at LP cylinder valve or at regulator.
3. Push in control knob and turn it anti-clockwise to HI position. Push and hold ignitor button
to light the burner.
4. If the burner does not ignite, turn control knob to OFF position, wait for 5 minutes before
attempting to relight the burner.
5. If the burner ignites, repeat for other burners, and turn the control knobs to the
temperature setting required for your food.
Should the burners still fail to ignite, check the gas supply.
MANUALLY LIGHTING THE BURNERS WITH MATCHSTICK OR LIGHTER:
1. Turn ALL control knobs to OFF position.
2. Turn gas supply on at LP cylinder valve or at regulator.
3. Put a match in the match holder. Match holder is attached to side panel.
4. Place the lit match through the match lighting hole on side panel. Make sure the lit match is close to the burner ports.
5. Push in control knob and turn it anti-clockwise to HI position. The burner should light immediately.
6. If the burner does not ignite, turn control knob to OFF position, wait for 5 minutes before attempting to relight the burners.
7. If the burner ignites, repeat for other burners, and turn control knobs to the temperature setting required for your food.
Should the burners still fail to ignite, check the gas supply.
shopbackyardpro.com