Table of Contents
Advertisement
12 |LP Cylinder Information
LP CYLINDER LEAK TEST & INSTRUCTIONS
NOTES:
• Leak test must be repeated each time the LP cylinder is exchanged or refilled.
• DO NOT smoke or have anything nearby that can easily ignite, such as lighters or matches.
• DO NOT use an open flame to check for gas leaks.
• The appliance must be leak checked outdoors in a well-ventilated area away from open flames or sparks.
• REMOVE any pots or other cookware from the burner before beginning the test
• Use a clean paint brush and 50/50 soap and water solution.
• Use a mild soap and water. DO NOT use household cleaning agents, which could damage the gas component.
1. Turn all burner control knobs, regulator and cylinder valves OFF.
2. Be sure regulator is tightly connected to LP cylinder.
3. Completely open LP cylinder valve by turning hand wheel counterclockwise. If you hear a rushing sound, turn gas off immediately.
There is a major leak at the connection. Correct before proceeding.
4. Brush the soapy solution onto all metal seams and the entire valve area as shown in figures below.
A
A
5. Slowly turn the LP cylinder valve counterclockwise to the open position.
6. A leak is identified by a flow of bubbles from the area of the leak. Close LP cylinder valve immediately and retighten connections.
7. If leaks cannot be stopped, do not try to repair, contact your gas Hot Food Table dealer for assistance. Do not attempt to operate
appliance if a leak is present.
8. Always examine the hose for any damage. If damage is observed, do not attempt to patch the hose. Replacing the hose is the only
safe option.
9. For assistance with any malfunction related to the LP cylinder, regulator or hose, contact customer service.
10. Always close LP cylinder valve after performing leak test by turning hand wheel clockwise.
shopbackyardpro.com
B
B
C
C
Advertisement
Table of Contents
